The Jalopy Journal
My 64 is my favorite.. I just acquired this last week.. I've always liked these wagons for some reason, I just had an eye for them I guess.. Its...
The old Bronco housing suck for narrowing, they are thnner tubing, the tubes do not slip and plug weld into the center section, the tubes are just...
dynos can put out inflated numbers.
thanks again don, I have a friend that works behind the counter at advance auto so I might be able to get it a bit cheaper.
As much as I hate going to walmart, looks like I might be making a trip.. thanks don.
anyone have any good links to seat build threads.. I've used the search function here and in the tech section with no results.
pete and jakes are a little too proud also.. they want like $180 for them, and they look like the wintec pieces.. I would make my own before I...
exactly what i thought
I'm looking for some high quality Bolt-on Spring Behind /Batwing/Hairpin Brackets, also a couple of high quality 1 3/4" Spring pivots. the...
3m imperial microfinishing compound and a buffer..
thermal arc 185 or 200 or HTP 221 best bang for the buck
I wouldnt put either in it..
Caught the show last night.. It was ok, concentrate on the builds and not the drama.. I think if you did the show more towards a teaching aspect...
i have to agree, a car chassis isn't where you experiment or learn to weld...
think i would have to get another expert opinion before i would let the building go up any further... if your just building the house and garage,...
and i always thought the engineers tilted the engine and transmissions to gain more leg room in the passenger compartment. and added pinion angle...
you could also use the swedged steel tubes, afco makes some nice ones..
i like Sait .045 thick cutoff wheels
the variac is i guess an old rendition of a variable frequency drive like i use on my old j-head bridgeport mill.. i have the vfd running off...
one of three.. welder, lincoln 180c and a bottle of 75/25 plasma cutter, probably a thermal dynamics cutmaster42 theyre about $950 hit up an...
dont think i could do anything to it.... get it in good running order and enjoy it... that thing belongs in parades and toodling around town...
could you plant some flowers and spread some cypress bark around it and call it art? first thing i would do is find houses of elected officials...
whered you get the flat crossmember?
Merry Christmas, Happy New Year.. Be Safe!!
i would go with the welding class for starters... next is to get a good assortment of hand tools, wrenchs, hammers, mig welder, a benchtop...
yep, seen it on the news website. hard thing to happen at christmas time..
i have a 24x32 with 8ft ceilings, insulated very good... i have a small 30,000 btu lpg radiant heater with a blower on my back wall, its mounted...
you could use a 90 or 120mm computer case fan..
i'm a tool&die maker by trade, i use a bench grinder to sharpen most my drills at home... at work i use a small benchtop toolpost grinder to...
is mas racing products still in business? found this http://www.dansperformanceparts.com/buggy/fuel/buggyfuel1.htm
Separate names with a comma.
The Jalopy Journal
