The Jalopy Journal
Everything pictured here is included. Some light pitting in spots on the axle but overall everything is very nice. Local pickup only please....
Very nice set of four (two front, two rear) wide five hubs and ‘42-‘48 backing plates. All four hubs mic out right about .300 One hub is missing...
Nice straight set of 4 Kelsey Hayes 16” wide five wheels with trim rings and caps. Wheels have good lug holes and no curb rash or dents. All clips...
Mechanical Fuel Injection unit for the old style Ford 221-260-289-302 Small Block engine. 360-F-8 casting number. Butterflies turn freely. 6A...
[ATTACH] ET Five Window Wheels with Vredestein 155 SR 15 Sprint Classics. Wheels are 15x6, 3 7/8 backspaced, and 5 on 4 3/4 bolt pattern. No miles...
This is an older Complete Deluxe Interior kit from LeBaron Bonney. Never used and appears to be all there. There is some minor water damage on a...
Is there a factory support bracket or something else behind the dash to hold the steering column rigid beyond just where the drop bolts to the...
[ATTACH] [ATTACH] [ATTACH] Here's a pair of Rootlieb 1936 Ford smooth hood sides that I ended up not using on my car. They sat for a while and...
[ATTACH] [ATTACH] Set of 4 1935 Ford wire wheels with old bias plys. Wheels are in good condition with no road rash or dents. Some surface rust at...
[ATTACH] [ATTACH][ATTACH] 1936 Ford flathead radiator for sale. A few bent fins here and there, no apparent dents in the tank. Overall nice...
I'm finally getting around to installing the Fat Man dropped uprights and steering arms on my '54 wagon. Upon disassembly, the lower control arms...
I had my heart set on these for the back of my '36 and now I find they are out of production. Coker doesn't even have them. Anyone know where I...
I plan on using a TKO unit in my '36 Ford. Right now I am in the process of getting the chassis squared away with regards to engine/trans mounts...
So I'm needin' a set of coil springs for the front of my '54 Chevy wagon and a local fella has a set from his '53 Pontiac available. Same thing? I...
That is my question. I'm looking to ditch the cheapo, no petcock, aluminum, roundy round style radiator in my '54 Chevy. I took the original...
I'll attempt to kick things off this week. Here's something I did in high school that I thought originally was done by Charlie Smith. [IMG]
I'll be in the Detroit area Sunday night thru Wednesday or Thursday night. I'm busy with training classes during the day, but was wondering about...
Did Chevrolet change their bolt circle from '48 to '49 like Ford did, or did it remain the same? I'm interested in early 16" chevy steelies that...
So I'm thinking about making a big career shift. I've been at Ford Motor Co. since I was 18. Good pay, good benefits, stable employment. In my 15...
If anyone still needs a room, I have an extra at the Stateline Nugget for August 11, 12, 13, and 14 (Friday night through Monday night.) I believe...
I just found out that one of the few remaing local tracks is done after this year. I grew up with my dad taking me to watch circle track races all...
I'm running two 97's on an adapter to a 4 barrel intake on my 302. The carbs have been completely rebuilt and run great, but suddenly I have to...
I've got the 9" rear bolted into my '36 Ford chassis and the pinion is up against the passenger side of the driveshaft tunnel. It's a TCI frame...
I'm planning on running 16x4 1/2" steelies on the front of my '36 Ford, but I'm trying to figure the tire size. I'd like to go as short as...
I'm on the verge of ordering a chassis for a '36 Ford I own. It is offered with either a 5 on 4 1/2" or 5 on 4 3/4" pattern standard. I'd like to...
Here goes. I've decided I'm going to start my '36 5 window here real soon. After much indecisiveness, I'd like to go with a new frame w/ full...
A friend of mine runs a local tattoo shop and wanted me to come up with a hot rod inspired T-shirt design for the business. He only asked me to do...
Assuming that the conditions are good and it happens this year, how much would I miss by going on Mon. and Tues. vs. the opening couple of days?...
OK. I hate to have to even post this here, but I'm sure someone can help. I'm trying to find larger diameter STEEL wheels for my 2001 F-150 daily...
Separate names with a comma.
The Jalopy Journal
