The Jalopy Journal
you need a 1954 rear end for better gear ratio or i think patricks sell just the gears to modify yours
thanks for all the help. i think i will go with a gauge and the holley regulator
is the Holley fuel pressure regulators better
I have a rebuilt carburator and a new fuel filter
Hi my problem is I have gas flowing out of the carburator. I just put a electric fuel pump on and cheap fuel pressure reguletor but I am still...
12v system
I already have system and ordered a pump from rock auto and it already failed so I am just looking for reliability. also what gph should I get
has any body used a electric fuel pump on a stock 216 engine. if so what is the best fuel pump for the money.
how do i clean those or should it be rebuilt
it fires up if i put gas in the carb
i am not getting any gas to my carburator. I just replaced fuel line and fuel pump and gas is coming out of fuel pump but it is not starting
stock bellhousing, a 91 t5 out of a s-10, and the bolts don't hit
well i have a adapter that is about 9/16 inch wide. i got it all bolted up and the flywheel won't move.
i have 216 in a car. are car bellhousings different.
i was wondering if 216 and 235 bellhousings were a different depth. All t5 tech tips use a truck 235 bellhousing. I know the bolt pattern is...
that adapter from hamilton would not work on my bellhousing.but i get what you are saying
some pics
yes i put it in and it is still sticking out 1/2 inch from the adpter plate. i was wondering if i still have to cut a 1/2 inch off the tip or make...
i have 91 t5 trans i am trying to put behind a 1950 216. i made a 1/2 inch adapter plate and the transmission is still sticking a 1/2 further than...
is there any thing special i have to do to the 57 rear before i bolt it on
will a stock 1950 chevy master cylinder work on disc brakes.
Separate names with a comma.