The Jalopy Journal
I'm building a 331 Hemi for my A Coupe project, was wondering if 3 Holley 94's will be enough for the Hemi? How much horsepower can 3 94's...
This is how it looked when I brought it home [IMG]
[IMG]
I'm building a frame for a 1930 Model A 5 Window Coupe High Boy on ASC 32 rails and need some help in setting up suspension. I'm looking to have...
I have a Hemi with codes VT 348 1621 behind water pump and head code 1536367-1 . Can't find any information on either casting number in the Hemi...
I purchased it from Crestliner I need something with a little more interior space than my channeled Model A truck. I plan on a 32 frame, Highboy,4...
building street rod with stright axle out of 36 ford with aftermarket spring , split wishbones with the spring mounted 8 1/2 inches back from axle...
My truck was running fine but my carbs were leaking so I purchased some rebuild kits from Vintage.Now I can't get the thing to run at all. The kit...
My Flathead was running great but both carbs were leaking. I installed gasket kits in both carbs and now it floods and dies and is hard to start...
I have a 47 flathead 400jr cam, edelbrock heads,offenhauser reg.dual,dual holley 94's,mallory elec. ignition.It's hard to start when cold,once it...
I finished the truck 2 days before Crusin The Coast. [IMG]
Made some headway the past couple of days. Installed the top, gauges,intake and carbs. Hope to start and test drive in a day or two. [IMG]
This is my first time wiring a rod from scratch, was wondering if I had to put a diode in the line that comes off the regulator that goes back to...
On my model A truck I'm running the original gas tank. Do I need a fuel pump or will it flow enough with gravity? I'm running a 59Ab, 400jr with 2...
Hurricane Gustav slowed me down but it's st[IMG]arting to come together
I just installed a new Isky 400jr in my 59AB, I have a book that say's to bring lifter to full lift and then give the crank a 1/2 turn and set...
So I've finished the frame took every thing off blasted,primed and painted it. The cab is finished I blasted,primed and put some black paint on it...
Some pictures of my chassis for a 1930 Pick Up.[IMG]
Here's some pictures of some custom wide fives I built for my 1930 Ford truck project. I used F250 rims and cut the centers out.[IMG]
Separate names with a comma.