The Jalopy Journal
Anyone of you on here have access to a set of Hollander's to include 1964? Looking for a fuel tank for a '64 Cutlass wagon, NOT a Vista...
Anyone know of a source for, knowledge of, a TAPERED SLEEVE ADAPTER that will allow a GM tie rod end (ES323) in a steering arm that's been reamed...
Bump
BTT
In original box. Box shows some shelf wear. Part # 0BA-6211-A. So far as I can determine, these are STANDARD size. The backs show the Ford...
AlanP561.....Yep, from your description, that sounds like them.......source?
Several years ago, I used a product Hedman called "weld rings" or "spring rings" to fab the headers for my Willys. These things were (I think)...
I just went thru this same question after a pinion angle change/replacement rear end in my Willys drag car. Short version, I changed the pinion...
Looking for a source for rear axle/leaf spring U-bolts (3" diameter axle tubes) that are either manufactured or machined FLAT on the inner...
I'm almost to the point of a restoration of a pair of Mickey Thompson valve covers. They aren't a matched pair......one is bare aluminum, the...
Started @ 14 (almost 15 years old) at the 2nd largest Standard Oil Station in the St. Louis area...on Lindbergh Blvd. north of Hwy 40......Domain...
The yellow '41.......that's the replacement for the one stolen (inc truck and trailer) I believe. The VA license plate and the shot with the...
Please contact me. I tried a private conversation, but can't figure how to send it.
BIG thanks to ALL who were part of R'nR '18 this past weekend @ Dragway 42. Don Moyer at the top of the list for starters, followed up with...
Gassers???????????????? Let's look real hard...............'58 Chevy? '61 Chevy? (a straight axle doesn't make it a gasser). Morris...
Ditto on pulling the pan and servicing the oil pump. And, it's been part of my learning curve in the 50+ years of dealing with this stuff, that...
Anyone have a discount code that you would be willing to share for a Rock Auto Purchase?
Hi Bill....... Wondered how long it was going to be before you got around to the story on my/our car from the Canadian woods. Yes, it started...
Check your private messages/conversations.
As the owner of one of each....glass and steel......you're gonna enjoy the 'glass car. I beat the hell out of my steel car for 10+ years @ Indy,...
Aluminum as a starting point. The bigger the better....as in more SURFACE area for the core..... Wider/taller. If you start stacking tubes...
The frame in the photo appears to be a '41/'42 vintage. The "X" member on the early frames ('37-'40) is the same width from the attachment points...
There's a difference in length......difference comes in whether or not the original was an A/C equipped engine or not. I think there's about 5/8...
Contact me please off forum, either by private message or direct email [email protected] Might be able to help you further with your...
Rupp D300 "fun kart." Not a Lancer....difference in the steering shaft support. Fixed motor mount on left side is the give away that it's a...
Thanks guys. And okiedokie........the coupons you mention are only usable for on line purchases, and oil won't ship, it's pickup in store only....
Seems like every year for the last 3-4, Valvoline VR1 race oil goes on sale at Advance or Auto Zone or one of the chain stores. Anyone seen it...
The photo was shot in Wayne Arteaga's garage in north St. Louis. The tall thin guy standing with Doug Cook is one of the Helmuth boys (John I...
The Willys passenger cars I've been around from that generation have all had in line fuses, usually near the switch, for whatever circuit you are...
Separate names with a comma.