The Jalopy Journal
They are filled with natural rubber. Find that rubber tree & your all set.I run 4 of them on my flathead powered dry lakes modified & they work...
Have a machine shop make you one out of aluminum.Maybe the repop guy has them? Good luck.
I would think somewhere between $400-$600, if were mine.I have a water heated version of that intake & would not take less than $800 for it. Good...
Kiwifruit is correct. The intakes made in the late 30's & early 40's used the Eddie Edmunds logo & then made changes as noted.The late 30's type...
I put a few hundred thousand miles on the one I had till it crashed.They work great.The also made an electronic ignition version, check the label.
It should have a closed drive line already. Just find a 39 floor shift gear box, or a floor shift kit to bolt to the back of your 3 speed.
Will most likely be there. Hitching a ride with a friend of mine in his 32 hi-boy coupe. See ya there, some where?.
Try the Ford Barn site, as someone over there could answer your question & find another convert to look at.
Pretty damn cool if you ask me.How often does one find NOS Edmunds heads of any kind??.Now put those suckers to use & not on the wall like I do.
When it comes to their ratings, that does not mean much. Fit the biggest one you can get into the space you have.Bigger is better when it comes to...
Yard art.Tree limb type?.
Very sorry to hear that. He has worked on two of my merc's over the years.Considered him a good friend.If it were not for my radiation treatment...
Could be Halibrand or Frankland or?.
I don't know how exact it is, until I pick up the patterns.Another guy I know in Newburg Or has been casting them for years, but ran out of them &...
I thought i'd throw this out there & see if there is any interest in the slingshot top section for the intake. I'm getting the patterns to cast...
flatjack: I do in the 59ab in my dry lakes modified. It was a factory rebuild & came with that setup in it.You need to check with Bruce Landcaster...
Hey Scott: I'm getting the patterns back this sunday to make another run at casting them. I took the patterns back ( in December down in central...
Have it hydo cleaned. They use high pressure water, soap & a glass bead material. The finish looks original. I have also used DURO aluminum...
He saved the day I feel. The Barn is a super place & I for one was not looking forward to it going away. Now he has Shelly's big shoes to fill &...
I see them on ebay every so often & you might want to try Norm Rapp at 415-333-8510 in the san fran bay area. Good luck.
It was not raining hard enough, so I stayed home?,LOL..This is the first one I have ever missed, but my back just can't take it any longer.
The aluminum pedal arms can be heated and bent, as long as one is careful with the torch. Been there & did it to mine in a 26 T touring. The...
They were cast in Portland Oregon in the late 40's.The same company used different names on them also, AI just don't remember off hand what they...
I think there is an acid hardening process that can be done also vs heat treating.
Duro makes an aluminum cleaner & it works slow & sometimes it takes a few coats to get the really tough stains off.
All you need now are the correct water pumps?.Looks good all painted up & to nice to get it all dirty again?,LOL.
There are pictures on them on ebay now.Your best bet is to find someone in your area with a 40 convert & check it out, or find a 39-41 ford body...
Canfield Cylinder heads is out of business thank god.I got screwed over by them big time when they sold me a set of alum. heads that were not heat...
Flat-o-Products sells the whole works to put a c4 on a Y block.
The windshield does also.
Separate names with a comma.
The Jalopy Journal
