The Jalopy Journal
The 76 should have flare fittings and the later boosters have o-ring fittings. The way the brake pedal rod attaches is different but probably...
010 block casting is 4" bore Crank flange is 3.75 stroke Manual trans pilot bushing Can have stock short 400 rods and stock 350 pistons. I have...
If he raced and used some of those race heads its possible that the heads could have spread exhaust ports.
For reversing the motor I picked up a used drum switch for practically nothing on Craigslist. [ATTACH]
If I am remembering correctly you can remove all of these shims and it will increase the pump output pressure. I didn't have the fancy clamp so I...
If interested in a remote reservoir can they are probably most common and the easiest to find were on the 6.2 diesel in GM pickups. I have seen...
There are a 100 different reservoirs. They are clocked different, different styles, remote reservoirs. Some reservoirs have no bolt holes, 1 hole...
I have used gears in worse shape than those for daily drivers. I did use graphite powder mixed with the gear oil. It helped with the noise.
I would get the frame fixed before doing any body work. It would be best to cut all of the independent suspension off and go back to the original...
A little ot but I have had several 700r4 transmission output shafts welded up and new splines cut. The output shaft was put between lathe centers...
I was at a swap meet a couple years ago and a guy had a set of iron eagle heads he bought from a shop in Wisconsin. The shop has a cnc program to...
[ATTACH]
I have seen one other fuel pump rod bent that way. The rod fell down when the pump was bolted on and the arm in the fuel pump bent the rod.
I had Delta cams regrind an old FJ40 cam for me. They had 2 different profiles. Unfortunately they ground it to the one I was not wanting. After...
If you disassemble it in a big bag it's easy to find springs or pins that could fly out. I use a clear 2 gallon zip lock bag when doing lock...
In the late 70's after school I was working in a local garage. A customer came pulling his wife's impala station wagon in. The wagon was a very...
I should of said I was living in Missouri at the time.
EDIT: I was living in Missouri at the time I had installed the window seal tape. The truck was black and it always sat outside. A few years ago...
[ATTACH] [ATTACH] [ATTACH] [ATTACH]
Just a couple things left over from my 47 chevy. Should fit in a $7.65 usps flatrate box Park light gaskets Caged nuts Trunk lid rubber stops...
[ATTACH] [ATTACH] [ATTACH]
Well I like tools so I bought one also. Probably will never be used but I have it just in case. :)
Several years ago I bought a 305 from a wrecked 92 Camaro. It had TBI and I installed a carb and mechanical fuel pump. Idled fine but would run...
Sold.
Trunk lid support, one is off a 47 coupe and no idea what the other one is off of. 47 coupe bench seat handle. $20.00 shipped in the US. [ATTACH]
Separate names with a comma.