The Jalopy Journal
raise the mounting hole on 1 wheel, 3 wheels are faster than 4
92 at work and 6 at home. bought over the last 25 years. the oldest(petersen) pairs are the best after just replacing the springs in them 6...
mmmm
I'm for it
hate it
You mean weened right? :confused:or have you been slurp'n the oil down?:eek:
did international exist in 1900?
great work
sounds like building something no one else would ever want.
those are some nice rides
The heads are 1968 360,390,428 heads with 68.1-71.1 cc combustion chambers, So the only way to truely identify the internals is to take it...
Check between #2 and 3 exhaust side by the spark plugs or # 5 and 6 cylinders. If no numbers pull a valve cover and look for the casting...
the 9 or 6 is the calender year of the motor the B is february the 12 is the day, so the numbers from the water pump mean either 1959 or 1969...
All Fords have the distributers in the right place! THE FRONT where you can adjust them.
find the casting numbers and I can tell which block it is! Is the intake manifold part way under the valve covers? On the front of the block is...
welcome
Welcome
why?
oh KY stands for Kentucky???? not the gel????
just got it !!!! where have I been? SWEET
some peoples junk is our "treasures" my precious
I've used a Jet (japan made) at work for the last 20 years, They are nice drills. Look for one that has good power @ low rpm's
Nice work
Skajaquada has helped me out alot in the new parts department this past week, He's a real standup guy and watch out for that caddy engine he's...
what guage have you been using, and what welding process?
I've been able to remount the backing plates I just made my own spacer and welded the holes up , I also made a reinforcing plate and welded it to...
bttt
Maybe its the stubbornness in me that I want to make this work, and I don't have an extra 200+ bones to shell out(spindles,steering arms,ect.)I...
do you have any pics of the process? are 36 spindles different than the 28-34 spindles. I was told it would be a mild adaptation. anybody else...
I've read all the posts on 28-34 spindles and drum brake matings and the ones on 37-48 spindles. But they all seem to omit the 36 spindles, what...
Separate names with a comma.