The Jalopy Journal
Sorry for you difficulties. RockAuto says these vehicles used a 11X3 drum Raybestos # 2622R. I don't know if it is all inclusive and no...
I brought home a SBC in the back seat of my 37 Packard, another time I carried a 16" ford rim in a backpack on my motorcycle.
I have used it to free sticky valves on 3 L head engines. 2 of the engine had old gas and I believe varnish build up on the valves. 1 had new...
Brake clean , small squirt on the tight spot. If the rim is rusted or pitted I use other stuff.
[IMG] If this is the same car this is what it looked like when I saw it raced at Road America. This was a few years ago.
The 223, 262, and 242 diesel (Ford 6000) shared many internal engine parts.
Here is youtube of Fairlane coming thru. http://www.youtube.com/watch?v=UD48OX1wu14
Sorta sounds like Art Hershberger's Solar Automotive in Princeton, Wisconsin from the 70s for the valve covers. Flywheel does not look to be Corvair.
I had a 55 Mercury with a 4 bbl in 1959 and there was a "O" ring seal about 1/4 inch (7mm about ) over a fuel line inside the carb that leaked on...
My Ford overdrive when handle is pulled out does not freewheel and when you park it with handle pulled out it will not roll away if transmission...
I had a 4 bbl. Teapot on a 55 292 and it did not have any flat spots. Fuel mileage suffered when it started to leak gas but a kit fixed that. New...
I think 55 Corvette V8 and 55 passenger car with Std. transmission had solids. Powerglide V8 in 55 had Hyd. lifters. I could be wrong.
On my 312 I always set lash with engine at slow idle. I don't have jam nuts on mine so that makes it easier. You also know right now if tappet...
When at wits end I have used a jack hammer with a flat blade to break the bead.
In 1966 used Cobra and XKE were equal in price. Between $2,000.00 and $3,000.00 with the norm about 24- 27 hundred. I ended up with AC ACE for...
1 oldtimer ?did they have some 12v in '55 or something. I just looked in 48-55 Big Job parts catalog and it says Ford used 12 volt in big trucks...
Part #s from 1984 TRW catalog for 327. L2165F w/4 valve relief on head. #L2166NF with .125 High step and valve reliefs on head. The truck 327...
1956 Buick had a Tahitian Red I believe. Looks like your picture .
To PLYM49.& anybody else interested. I have dissolved thick lime and rust deposits with vinegar. Takes awhile but it does work.
<meta http-equiv="Content-Type" content="text/html; charset=utf-8"><meta name="ProgId" content="Word.Document"><meta name="Generator"...
My Catalog lists 2931 as 5 on 4 1/2 . No guarantees, check and double check. My 1971 Napa catalog does list a 10 3/4 5 on 4 bolt pattern.
The K5075 and K5077 fit 63 -70 Buicks but not the Skylark. Skylark 61-63 lower is # K 593 for adjustable and K 5085 for std. design. These are...
Once upon a time some people used chain saws plugs when they needed short. I never tried it.
The high point adjuster on the car box is in the center of the cover held on with 3 bolts. the Truck box high point adjuster is off set. The car...
Mink,is there any way to know which one i got? answer Pretty sure it is a car box probably from a late model by the looks of the steer shaft and...
AFIK the F/C van box is different. Many of the car box parts interchange but not all.
You did REAL GOOD !!!!!! Thanks !!!
I think of ABS as more of a steering aid than a stopping aid.
Motor's says 3 BTDC.
Be sure you have the later cast iron block and not the early COBRA block.
Separate names with a comma.