The Jalopy Journal
It could be possible the old alt was not working properly and issue never happened. I would go either the diode route or better the warning light....
I had the same issue. Have the valve body checked something is stuck.' Mine did same thing cleaned valve body worked great. Good luck Ray
There was a full story on the history of the Orange Crate in Rodders Journal earlier this year It is still around I tried to find the Issue but...
I got back into the vintage 3 wheelers when not building cars Why Because everyone says they are unsafe We lived through them when we were...
I did the cheep interior That way when it is messed up I just redo Yeah it will unravel who cares Ray
Here is what I did I used the ones from Speedway and welded them to frame then used Heim ends to axle Not the best of pictures but I can...
I have a 24T Roadster Same issue I could only go 2200 RPM in hi gear I was in Southern Cal Long Beach and found a guy that could true the...
I had the same issue with my 24 T I could only run 2200 RPM in Hi gear down the road any more the car would get outa control You need to find...
Here is a simple option Remove the starter solenoid from starter Install starter Hand engage starter (Engine not running) Look at tooth engage...
I have an older Miller 90 which is a 110 v Mig I use this for about 90% of the jobs around my shop Many Demolition Derby cars It Will melt 1/4"...
I was going to use a flat motor in my car and researched out the Speedway kit But were it my money I would contact the guys at Flat O Matic That...
Yea I had a 56 chevy years ago wasted rear 4 times les than a year Not good on the budget Explain to wife Realy it just broke I stayed Vintage...
I have a 63 Fairlane Wagon used Granada spindles rotors calipers complete Tie rod ends from 72 Galaxie You could probably just pull complete...
I get this out a couple times a month I found about 8 years ago Still has origional Arizona State inspection sticker in windshield I had to go...
Like the Body Just about what I started out with Fun car to build many challanges 16months Good luck Ray
Look at the Coker tire website They list all brands out there Good luck Ray
Try talking to the Guys at Flat O Matic They might be able to addapt a C4 Good luck Ray
Looks Great My first T had Towels stapled in It Worked Ray
These are all the sound system I need Ray
I put one of those Pro Crapics In my Ford Then took back where bought They said oh you need the Igniter Piece of this Went home install Drive...
Sorry My Bad I looked up in my file on car Found my receipts 76 Granada on spindle assemblies Tierod ends were from 72 Galaxie #ES426RL Outer...
This is not that difficult I have a 63Fairlane Wagon Same basic frontend Ford as we have figured out did not change allot I looked at the...
I found this 63 Fairlane about 7 years ago figured I would do on flat until I figured out what color to paint I liked the flat so much I never...
If they are on the drive axel I would say no Inless you are stranded in middle of nowhere If in say non drive axel I would say it is not best but...
Milestones The day I started after finding body and saying I was gunna build To the day I fired up the engine for the first time with Open...
I used a mustang radiator on a roadster years ago it had a 350 Nwe roadster has Olds 303 choice of radiator in 32 ford truck grill Mustang They...
Here Is what I did on my 62 Ray
This is what I did Buddys and I made panels one Sat Night/Sun Morning Wife and I did seat covers Not a Stitch Cost Material about $100 Beer...
Look At Bill Hirsch Products They carry the colors for every engine I bought the correct green for my 52 Olds 303 It is right I just looked...
Separate names with a comma.