The Jalopy Journal
I don't remember where I stole this idea from. It may have been an earlier post right here but I finally got around to making mine. Who doesn't...
Love this thread. Tons of great info. In an attempt to bring a little levity to this topic, here are 2 of my custom tools. We've all heard of...
I can hear a click while on 6V battery but no hum. On 12V, there is a definitive hum.
Thanks for all the support. Looks like I have 2 different issues. I have added ATF to the hydraulic system and now can get the pump to activate...
Nothing about application.[IMG] Sent from my SM-G930V using Tapatalk
The label only has the supplier's contact info. I've been trying to contact them to no avail. Didn't want to publish their name on line Sent from...
So I've inherited a 1948 Buick Special convertible. Having issues with the power windows, seat and top. I'm convinced the car is still setup for 6...
So I've been searching the boards and I've learned some things but still need to ask a question that I haven't seen specifically asked in this...
Sorry, forgot to hit preview and didn't realize that the picture was turned 90 degrees.
So I've been tinkering and tweaking and have gotten her to settle down quite a bit. I did have the idle settings all goofy, and those seem to be...
[attach]
Awesome! Thanks F&J
It sounds like I might have a similar problem. The link that is listed comes back with a "page not found" error, although it is on the TCI web...
So I threw a pressure gauge in line and she's reading 8 PSI. Someone above said that too high of a pressure could force fuel past the needle and...
Idle screws have no effect on the idle. All the way in or all the way out, there is no change in RPM. She holds a pretty steady vacuum of 19 / 20...
Here's what I know: I don't know squat about carburetors....... Small block chevy. 4 barrel Quadrejet. Runs great going down the road. Idles...
Thanks guys, The most common suggestion is the battery so I gave it a full charge, disconnected both battery cables so there was nothing tied to...
Another twist on this that I've been trying to get started in the Atlanta area is to setup a sign up sheet at a local senior facility, show up on...
Here's the latest project
A couple of projects going on
[IMG]
There are some pretty good videos on page 1 and 4 of this thread. http://67-72chevytrucks.com/vboard/showthread.php?t=366078&page=6
'31 on deuce rails
Not excactly home made, but home modified. A guy threw this in at the last minute on a tool deal and it's one of my favorites for a garage with...
Thanks guys. Being the cheapskate that I am, I ended up finding an allen wrench that was wide enough to fit the oval, and carefully ground down...
Hey guys, I've not come across this style fastener before. It's not a hex head, not an allen head, not a torx head. It's kind of an oblong...
So the question is whether this is a dumb idea or not. I've tried a couple of times to get this going locally, using flyers, and have gotten...
I'm running a bottle of Argon/CO2 on my mig and wonder if I can use that same gas on a tig welder? I've got a small, air cooled tig/plasma that I...
Separate names with a comma.