The Jalopy Journal
Looking for advice on a good shop that knows their way around a hemi. I’d like to have a 392 pulled apart and rebuilt. I’m located in Northern...
Ok so it’s my first go round with a flathead. I just bought the car and was told the 1946 59A motor was converted to 12v, negative ground. It has...
How much vacuum advance are you guys putting in a 392? I read all the posts regarding initial and mechanical advance, but not finding answers on...
Cragar Zoomies with badges. Coated and ready to go. Sold enderle blower hat with 58 nozzles. $1100 Hemi valve covers, no dents or dings $500...
Ok I guess it’s time to bring it to the pros. I’ve been on here for the last 3 days and nights reading every thread I can find about this. Tried a...
Hey guys. Can someone share a photo of a 4x2 inline with direct linkage? I have a wc245 with 4 97’s in line with straight linkage. My question is...
Hello. Looking at a Weiand 4x2 manifold for the 331-354 Chrysler hemi. I have a stock head 392. Can I use this intake? I was told HHH has spacers...
Ok I searched and read I think every post on here for identifying 9” rear ends. I looked a few sites specific to identification, but started...
So I found some discussions on here regarding the topic, yet I’m still confused. I have a 1957 392 chyrsler and recently picked up a date code...
So I fabricated in the power windows from electric life. Temporarily wired them to a toggle so I could go up and down while installing. Question...
I’m in Northern California, specifically the Bay Area and need some stainless trim worked. I’m going to shorten some bel air trim and want the...
1954 Chevy bel air The front door glass channel on the door latch side. The vertical piece that holds the felt. This is opposite the vent window....
So I’m almost ready for glass, but have a problem figuring what to do with the 1/4 windows. It’s a 1954 Chevy 2 door post and I slanted the b...
So I need to replace my trashed rear upper balljoint on my ‘63 deville. After my long depressing internet search, I found they go for $140-180!!...
So I got the car all apart and never took them off, now they gotta go back on. The problem I’m having is I line up the spring clip on top of the...
1929 Ford real roadster pickup All steel Ford 302 with roller cam and gear drive Ford AOD tranny Both recent rebuild Leaf spring front and rear...
ok so I posted about the ignition wiring a couple weeks back and thought I had it figured out. I wired it all up and have weak spark when I pull...
So I got this late 80's fuel injected 302 mustang engine. I converted it to carb. My question is about the coil/distributor wiring. I need to buy...
[ATTACH] Ok so I chopped my '54 2 door post and put in a rear shoebox back glass. I'm at the point where I'm starting the body work so I'm test...
Ok, so I need some help here with timing. I'm timing a pretty stock 454 with non hei distributor, but it's kinda a general question as well. No...
So I'm not getting fuel and took apart my mechanical fuel pump. The motor is an early c1500 454, '73 or'74. Checked the rod length, good. Then I...
Hey guys I have a 454 out of a 84 suburban and I want a non hei distributor. The hei is too large and I don't want to cut my firewall to make it...
Ok so I recently changed my front brake shoes, master cylinder/booster and front brake hoses on my '66 cadillac deville. After driving the car the...
So I've had an annoying leak coming from what looked to be the front pump o-ring on my turbo 350. I pulled the torque convertor and then pulled...
Ok so before I get crazy with jetting and such, i'll try you guys. Got a small block 350 with mild cam, 202 heads and lake style headers with...
So I have the chassis engineering mustang 2 kit for my 54 chevy. My question is since I have air bags the ball joint boots are pretty much not...
So I have a edelbrock 650 avs carb. It's on a 350 mild cam. Problem seems to be too rich. When I mash the throttle it sputters real bad and wants...
So I went to start the 350 for the first time and didn't get any oil pressure. Shut it down and pulled a valve cover. Looks like there was some...
Ok so I went to test fire and check the electrical today. When I turned the ignition to acc the balast resistor started smoking. It's brand new. I...
Hey guys did a search and couldn't find an answer. Anyway, I'm using a moon style tank on my '27 and it's mounted in the rear just about even with...
Separate names with a comma.