The Jalopy Journal
Here is a few more pics . [IMG] [IMG] [IMG]
I tried but the moderator said my car wasn't conventional enough oh well .
How do I post a full build thread ?
When I remove the frame I will finish off the bottom welds etc... then send out for powder coating . Man is this thing alot of work the frame was...
[IMG] [IMG] [IMG] [IMG]
Thanks that helps with the chrome trim I've had the car for about 6 years had the frame and most of it done in 2009 then it sat due to other work...
Here is some pics of the build . [IMG] [IMG] [IMG] [IMG] [IMG] [IMG]
If anyone has one of these cars with all the stainless on it and original and doesn't mind taking pics around car fairly close up it would be much...
I can see why they are needed now so will install thanks for the help guys .
Does anyone have a picture of what the receiver end looks like the part welded on the bottom ?
Ok I have that piece but because I replaced the rear trunk panel it doesnt exist anymore . Is it necessary to have this ? I know what you're...
What are these two holes for ? they have a black outline around them with two broken bolt heads . [IMG]
How about trying this link may work better . http://www.progasengineering.com/?page_id=273
Did the link I posted to facebook work?
If you would like to follow progress of this car I have it posted on my facebook page http://www.facebook.com/pages/Pro-Gas-Engineering/112312695635
I guess I'm kinda doing a survey as to whether or not to put them back in wife wants them in but I'm thinking no . so let the opionions fly .
[IMG] [IMG]
I've seen some cars with grill teeth some without your thoughts I will post some pics of the modified rear bumper and dash as well shortly .
It's been a while since I have posted on this board as work kept me away from my own project as customers come first . I built and modified a...
Just curious does having camber in the wheel affect this measurement or do you need to re zero the level in such a case in other words if you...
yes on the large holes around the trunk You have to put a back up strip in but that can be removed when your done .
cobalt bits waste of time broke 3 of them will try carbide bits next I cant be the only person that has run across this screw problem ? wondering...
there must be a special drill bit to remove the stainless trim screws I have some really good hss bits and they wouldnt touch them any...
the problems with the torch type system in body work is it would warp the panels . the system i use you can spray and put your bare hand on the...
here is a link to the type of machine Im using http://www.thermach.com/at-400.html
I will come on from time to time with updated pics as I get more done on the car . I was more posting on here to show my car than anything else...
one wire is neg one wire is pos and they meet and uses compressed air to blow the metal on the surface at around 125 deg f so you dont warp the...
that is the secret the place down the street is spraying an inferior wire that will debond if you grind on it so hence im sorry what me and the...
well that trunk part and the underneath part with sand blasting etc.. prob took me around 5 hours total Im getting better at it so i think in the...
well if its the same guy as I know of a few in washington that do it but yes he still does it and quite well very smart guy . I may eventually...
Separate names with a comma.