The Jalopy Journal
Been using white high-temp paint since the 60's..easy to touch up, too.... [ATTACH]
The December, 1969 issue of Car Craft magazine showed how to build a Z28 302" using all of the over the counter GM parts of the day. Great...
I'm with you, Petejoe, ...got it at the former Dollar Store(s), all I had at the time to use so decided to give it a try...it works great on all...
I never realized it was a "problem"...maybe that's my problem......?
Unfortunately, I'm keeping my 1995 GM catalog, for that very reason. If I could have seen the future, I would have ordered all of their catalogs,...
Also, check out '54 to early '55 Chevy / GMC truck bezels and gauges. [ATTACH]
O.K. just to join the party here...here are pictures of one of my 302", SJ, 327"'s I've done. Do them right, new rods, forged 283" 10/10 crank,...
Another casting link for you..good site: Chevy Casting Number identification - Block casting numbers (outintheshop.com) '69-'79 350", car or...
For years, GM cars stock from the factory ran fine with the stock fuel pumps. 348"'s with tri-power, 409's with dual quads. Pontiac Bonneville's...
Also, search for vintage dashboard / map lights for autos. I had one in my '49 Chevy truck... NOS 30s 40s 50s 6V BLACK DASH MAP LAMP LIGHT W/...
Truthfully, sounds like a good project....keep us posted. Bob
THAT's what life is really all about...keep it up!!
Based on your kind offer....you're going to need a BIGGER truck.....a MUCH bigger truck....
Well, you would first need a Model A, then a flathead and finally a T-5...??
It's a cultural as well as societal issue which began in the 70's. Another rule, or law or mandate will not correct our course...very...
Late to the party.... [ATTACH] [ATTACH]
A couple more to consider....my choice is old school AFB's... [ATTACH] [ATTACH] [ATTACH]
"This is the last cowboy song...." Ed Bruce Ed Bruce & Willie Nelson - The Last Cowboy Song - YouTube
This can't be California....doing something that makes sense for once???
Shows it is a '87-'95 350", for a car or truck, with a 2 or 4 bolt main. Others can chime in on proper flexplate with the one piece seal.
Yep, my high school buddy was a good, but careless, arc welder back in the 60's. I thought he was crazy when he put chopped up potatoes over his...
Here you go....for '55 to '62 Sixes...Happy Easter! Classic Industries: All Years Chevrolet Truck Parts | A510015 | 1955-62 Chevrolet, GMC...
1962 Nova.. [ATTACH]
On my 3100, I am using the original 6v foot starter, but have converted the truck to 12v. I run a resistor for the coil, and replaced my original...
Added these, since the thread is still up....my '65 Malibu and my '62 Nova... [ATTACH] [ATTACH]
My 327" with a 283" crank...302" Z28 clone... [ATTACH]
'46 Chevy coupe...started with a cross ram, then went with a 671... [ATTACH] [ATTACH]
Pretty good looking pair.....
I had a flywheel explosion street racing my '40 Chevy with a SBC in 1969. Destroyed the floorboard and dash, and everything in-between. Never...
This is a nice one, if it will fit in the trunk.... [ATTACH]
Separate names with a comma.