The Jalopy Journal
Tacked in the first draft of motor mounts. I’m thinking they need a little more beef. I was going for simple, still need to round the edges on the...
Got a little more done! [ATTACH] Rear end is as close as it’s gonna get. Checked pinion angle and square about a hundred times. Re adjusted and...
Thank you Matt..as far as the rubber I have a couple tires that will get me close so I can get my eyeballs on it sooner than later. I need...
Thanks! I agree as well with the bracing, as I mentioned, I originally intended on placing a cross member there, but now It'll get some...
My next hurdles are panhard placement and coil over angles. Feeling like I’m just going to Widdle a bracket coming off the top of the housing. How...
Ended up with a one piece setup that I’ll later cut and weld in a driveline hoop once motor and trans is set. [IMG] Sent from my iPhone using...
Yes it’s definitely giving me the freedom to go as low as I’d like. Although it keeps getting a little higher and higher as time goes by in my...
I ended up really liking the shape the rails took. Wasn’t sure at first, but it’s growing on me. Any thoughts? Parallel bars are pre mades from...
Oh cool Mike. Been chugging along. Got my kick up done for the 4 link in the rear [IMG] Sent from my iPhone using H.A.M.B.
Excellent reading. Thank you very much. This will get me through! Sent from my iPhone using H.A.M.B.
Here’s where I am so far temporary bracing is in, channel about where I like. But where to go from here is anyone’s guess! [IMG] Sent from...
Is it safe to assume there’s a thread regarding wood removal and the different ways these Chevys are braced up? I’m in the process and would LOVE...
[IMG] Sent from my iPhone using H.A.M.B.
Managed to get a shot of the progress of the wood removal and all the temporary bracing going in. You can see the new floor sills starting to...
Yes I’m stoked on the look of these heads but also wanting this to be a snappy little power plant with good throttle response. I plan on running a...
Good call....I’ll get into it soon and report back. Sent from my iPhone using H.A.M.B.
Hey mike. Yes! Slow but steady. As I mentioned in my new post I’m having trouble posting from my phone so I need to get my act together and post...
Been a while. I’ve been having trouble posting more that one photo at a time on my phone app and the home computer is always so far away! Anyway...
Thanks for all the input folks. Silly question, but would a rear disc setup in the rear lend the opportunity to modify the mounting width at all?...
Hey folks, quick question on rear end width on my 31 Chev 5 window....I've got a line on a ford 8" out of a with a width of 61" wheel mount face...
Just stumbled upon this ‘31 5 Window. Is this a H.A.M.B.’er ? The article says it belonged to a John McCluskey. I’d love to hear a bit more...
Hey guys. So quick redirect here. I’m curious as to opinions on hoisting the body of my ‘31 5 Window by the roof [emoji51] I’ve got good supports...
Welcome aboard. True on that trans...Definitely an invaluable amount of knowledge here. Sent from my iPhone using The H.A.M.B. mobile app
Stoked to see the Model T as well. Welcome to the H.A.M.B. Sent from my iPhone using The H.A.M.B. mobile app
Right! And I wouldn’t have dreamed of mentioning him if I didn’t think he was a man of integrity. He’s solid. I will say tho I cannot speak for...
Perfect. I suppose I should’ve mentioned, this guy would be more tuned for arranging shipment of parts than cars themselves. Sent from my...
Dan Cunningham with FreightQuote is his name 816.949.6353 is his direct line. So in reading the classified ads I've realized I may be able to...
Being a newbie is getting old! for the life of me I cannot narrow down an axle setup for my car...is anyone interested in assisting me? I want a...
Just pulled it out as an assembly. Also have the front spring hangers and hardware..Make me an offer. I have more parts as well. Eddie
Separate names with a comma.