The Jalopy Journal
Also you can retrofit an HEI out if a buick odd fire V6 to this motor with a decent machinist and a little welding. Sent from my...
Milling the heads is on my list, but not unless I end up needing to go through it. Sent from my SAMSUNG-SM-J320AZ using Tapatalk
Ungodly low compression around 7:1, crap carbeuration and exhaust. I have heard reports swapping that carb to a 500 holley 2bbl actually causes a...
I have. Sent from my SAMSUNG-SM-J320AZ using Tapatalk
That's what I've heard about these motors too. You can take them up around 5 grand but you don't want to do it very often. What I will ultimately...
Sorry, it is a sport coupe. Sent from my SAMSUNG-SM-J320AZ using Tapatalk
Because I picked up a 30 A 3 window and I plan to put the 292 in my dream car... Sent from my SAMSUNG-SM-J320AZ using Tapatalk
I'm actually thinking hook up the big V6 to a T5 5 speed fir the OD, and my Banjo has a set of 3.78s in it. My back tires shoukd be right around...
Not really. Still tryin to figure out the trans. Sent from my SAMSUNG-SM-J320AZ using Tapatalk
Cool lookin and simple actually. I strongly recommend buying the kit vs making your own though. I was going to use that setup. Ended up with a...
Not much modifying to do. New motor mounts, new trans mount add a clutch pedal (which honestly I wanted a standard anyways). Same radiator, had to...
I do appreciate it though. Im in the panhandle. Still a 2 or 3 day drive. Sent from my SAMSUNG-SM-J320AZ using Tapatalk
IL is a good little haul from TX Sent from my SAMSUNG-SM-J320AZ using Tapatalk
Id rather not say. He does more industrial/ag stuff than hot rod motors. And ge is goin to make right. I was $25 into that motor, he's goin to fo...
Going to replace the water pump from the get go. It leaks a little bit, and run a flex fan as a puller and an electric fan as a pusher, along with...
Any chance of having a link to it? A search for 351 V6 to T5 brought up nothing Sent from my SAMSUNG-SM-J320AZ using Tapatalk
I was also curious aboit trying to put a T5 behind it to help that out a little... Sent from my SAMSUNG-SM-J320AZ using Tapatalk
The highway 101 adaptors are what you seek. Again, no concern wih an aluminum adaptor at all. Sent from my SAMSUNG-SM-J320AZ using Tapatalk
So I sent my 292 Chevy to the machinenshop a couple months ago. Went by there a week or so ago and low and behold my engine wasn't there. Seems...
I'm getting mine from Howell's, as well as one of their big block firewalls. Whats nice about using Howell's is they'll louver it and press a...
Might add there's a LOT more left of yours than there is mine.... Sent from my SAMSUNG-SM-J320AZ using Tapatalk
Subbed because I too am building a 27 touring Sent from my SAMSUNG-SM-J320AZ using Tapatalk
I agree looms better painted, but I probably will go body color on mine Sent from my SAMSUNG-SM-J320AZ using Tapatalk
I build as much as I can. Sent from my SAMSUNG-SM-J320AZ using Tapatalk
1/4" plate is cheap (actually free as I have some already), and I don't pay for grade 8 bolts. I found some shackles I could buy for like $20 but...
A search didn't bring up anything. But the shackles pictured above are real close to what I have in mind, other than I'm just gonna angle cut my...
Would somebody using a stock A axle and spring mind measuring your front sprin shackles for me? I am going to build my own. Also, what did you use...
This Sent from my SAMSUNG-SM-J320AZ using Tapatalk
Model A axle on my 27 ford Sent from my SAMSUNG-SM-J320AZ using Tapatalk
Spring perches are what I'm thinking about vuying. Sent from my SAMSUNG-SM-J320AZ using Tapatalk
Separate names with a comma.