The Jalopy Journal
Thanks guys, wired it to the acc side of the switch, all good but my light doesnt go out. the alternator is good and putting out 14.3 to the battery!!
Hi guys im having a bit of an issue trying to wire in an exciter wire for my gm alternator, either i blow fuses or the truck keeps running with...
kjbnhbmnmj
Hi guys, was wondering if i could drill and tap the end of the new m/c to accept my brake light switch?
thanks for the help guy's
not sure!
1
Has anyone used anything from Pirate Jacks in regards to brake components, im looking at this but not sure of the quality: looking to fit to a 60'...
Took the wiper motor apart gave it a good clean and all working well, just need to get the correct blades now.
how do i get the trico wiper motor out of my 19 ford f10?? cant seem to find any clips that connect the motor through the firewall.
thanks guys, i will have to start thinking hard, which way to go. bore on original single pot was 1.0625" new one 1" would this be a significant...
Would i be able to still use this m/c and just take off the proportioning valve?
no real difference. No booster fitted.[ATTACH] Any brake gurus out there??
[ATTACH]
i can get brake lights. should have read CANT get brake lights! Ive sorted it now, the original wire had a brak in it, as it was brittle and must...
can anyone decipher the wires coming out of the firewall blocks on a f100, i bought a laminated wiring diagram but around 60% of the colors are...
Before i get jumped on, the wiring was like this when i got the truck, and i fully intend to replace it when i can.
can anyone decipher the wires coming out of the firewall blocks on a 1960 f100, i bought a laminated wiring diagram but around 60% of the colors...
Way down South in Newquay Cornwall. To correct, not sure where i got the load a matic from! its a manual 3 speed.
My 1960 F100 is now nearly ready for the streets and one of the last things on my list is what muffler to run? engine is a 223 with manual 3...
Hi Guys
Separate names with a comma.