The Jalopy Journal
If I have a right hand drive vehicle, do I need to get a right hand drive steering box or would any from the likes of summit, speedway, etc. work?
Im curious, if retaining drum brakes, how much does a master cylinder come into play if hp is upped? I guess I'm asking is do different masters...
I've been debating for some time about getting an inline fuel shutoff valve. The reason is somewhat 2 fold. Reason one for a basic anti theft...
My understanding is it's super rare. Most 'experts' I've talked with in trying to get info on it, as i mentioned missing clutch disc guides, say...
The main thing that led me to ask this is trying to make sense of what I have so I can get the correct fluids. I used royal purple 75w-90 on my...
Has discs and have been told it is by anyone who has seen it. Did you see the differences in the pics above? Here is a picture of the disc on...
The G80 is a specialized differential designed by Eaton to work as a low-speed traction aid, offering full lockup during its operation. When in...
The description on the g80 locking diff is that it's open when not locked.
Ok, but this is the typical description.... ****What's the difference between Limited Slip and Posi? Posi means that both of the drive...
Can someone clear this up for me for once and for all? My understanding is that positraction was the term GM used to describe their limited slip...
I opted for the 45 degree fitting so that I could easily clear the lip a few inches up. Figured I can get the line going away from cross member...
I'm a bit confused on the fittings I showed do I do a double inverted flare or just a single 45Degree flare? Is there anything wrong with what's...
There is already a pickup tube inside the tank. It's factory built in where the 3/8 not fitting will go.
Not thrilled with it either, but it's the only option I have at the moment. I can't find a 5 hole sending unit with pickup for a 7-1/2" deep...
Here's a screen shot of the parts and the tank.
He didn't say to use an AN tube nut. It's a tube nut for inverted flare
I need to hook a gas line up to a recent fuel tank install on my 60 suburban. The tank is a 38 Chevy tank, so there's been some mod work. End...
No haven't swapped or ordered Ram Horns yet. I have a 2" Ram horn center dump on the right and a 2" truck manifold with rear dump on the left....
Yes, sorry, I should know better than saying 4speed when talking of the automatics, but that's the way I think of it. Maybe mind somewhat made...
Didn't say couldn't, just have been told it makes for a noisy sort of long drive.
I have a 3.90 Posi in the rear.
[IMG] Hope this shows up. Here's how it's currently ran.
My hard rubber layer is gone, it was overlayed by this and that and all of it was nasty. I wouldn't mind going back to that look IF i could find...
That's an option I guess, but the mani's will likely be 2-1/2, so unless the bends are difficult to get good clearance and such, I hate to...
Then I was misinformed. I thought the 4 speeds (forget the popular convert from T350) had a gear that kicked the RPM's down, thus making it more...
Thanks! The 60 Burb actually doesn't have a sheetmetal bed like the newer ones it's 3/4" plywood. It was overlayed with cutback paper(or...
Not that it can't run on the HWY with that transmission, just that I doubt I spend much time running it on HWY because I hear the T350 will wear...
XXL, thanks. I think I'm going to order the Ram Horns. Just seems to make sense on this setup. I also know the 2-1/2 in theory is better and...
I'm not trying to over complicate, just need to make certain I get the right mix/match to make it simple and not lots of extra work. (pertaining...
That's why I ask, will I notice a difference with 2-1/2" vs 2-1/4"? As for headers, I'm told from people with this year and frame the full...
Separate names with a comma.