The Jalopy Journal
Lol Ya if only it was that easy.
Yes and no because your loosing 2 things that have given problems or will give problems push rods and lifters the hyd. Lifters don't give you the...
I am sorry maybe it was mistake to even bring this subject up. By no means any ofence to any one that has posted to this you all have gave very...
My thoughts are they are still maintaining the original heads and cam for the 289 as would I especially since the motor I have is running gt40...
I think at point I'd spend 1600 on used 5.4 triton 2g on blower and get it over with. Be making the same horse power with half the cost ya it...
So would I but I'm not gonna drop 6-7 g's on it and then another 2 g to make it look like its old
I believe they where base on the smaller 255 and 260 small blocks and where very complex for the cam drive system similar to that of the gear...
[ATTACH]
[ATTACH] [ATTACH] This is the reason why I brought this subject up these where at one point in time possible
That looks great and did an awesome job to hide the modern motor
I don't wanna put a modular motor in a classic especially if it's going to be in a hot rod and definitely don't want no computer I fought enough...
So I've always wondered what the potential of having a set of heads that mimic the original 427 cammer set on a 289 or 302 giving the look and...
Totally agree that it's a shame to see them get crushed if I had the means to buy everything especially at $2 a pound I would and start a classic...
[ATTACH] This is what we use to remove rust and mil scale. Its like jelly so you can brush it on and rinse with soap and water. The thicker and...
My bad 8" in the Mavericks where similar to the 9" drop in forget the information I posted about the 8.8
I have to identical trans T-5 to be exact one out of a 5.0 mustang and the other from turbo T- bird they don't have the same ratios they geared...
In my opinion go with the 235 seen to many with 350 it's like a over played song it gets old. I love the car even tho not a Chevy fan
You could take a brass wire brush or they make plastic brush that can be put on a drill. I'd think trying a steel brush but it would remove metal...
I'd say it's staged you can't see a second tire threw the grill and front drivers fender is sitting to low to have one on drivers side is missing...
92-98 Ford ranger with 4.0 ran 8.8 28 spline and 3.55/3.73 explores ran 31 spline 8.8
Our teachers in tech school gave us junk cars to practice on they started us with BFH to a fender made us pull the dent as straight as we could...
Ive tried them already no luck yet
I've look at using a repop model A radiator it's close enough to the size I need and still retains they cap out the grill top but was seeing if...
I'm building a 35 international and wanna try to Use the original hole for radiator fill on top the grill shell. Has anyone tried to do the same...
I'm a gear head from Mn. Currently building a 35 international have poked around reading threads as a nonmember getting information that was very...
Separate names with a comma.
The Jalopy Journal