The Jalopy Journal
When was the last time any one saw a pile of these.
Yes it is aluminum and the 062 and 906 are cast iron.
The aluminum head that has the vortec chamber and raised D shape exhaust ports is GM part #10128374. the 062 and 906 do not have D exhaust ports...
Lets start off with the stock type spring you are using dose not have an inner spring it is a dampener.You should use a spring cup that was...
I agree with Jim use a lathe with a collet set up. You can also wrap a piece of shim stock around it all so.
I build a lot of 2 bbl circle track engines that by rule we have to run 1.260 springs stock dia. So there are a lot of springs that will fit you app.
Reading this post is great i,am so bad with it when my wife and i go to the local deli and i,am waiting for the cold cuts i re align all the cans...
Yes very easy to do with HYD.
Yes plug the vac when setting initial.
Heres what go,s in those cans.
Set total timing at 32 degrees as a start.
Pressure washer, soda blaster Will clean then also if you are getting heads back from a shop that has glass beads in the bolt holes find another...
Timing to far retarded gas is burning in the headers.
They just had an open house up by me at Johnsville Naval Air Station in Pa. now closed and turned into a commercial park. Any how the astronauts...
I will give them the benefit of doubt. It is very possible the car may have been junked or put in the yard Short time ago. We don,t know if the...
Nice fine
The Pro Action then Pro Topline have been around since the mid 90,s They had some cracking problems in the Beginning but got that straighten out....
Straight 8 firing order:1-6-2-5-8-3-7-4This is from my 1951 Buick Book
Hyd. Roller cams i set up with 130 seat and 350 open.
I don,t turn down any work in my shop i have had everything from a 39 packard to an LS1 in the shop this year.
Ok stand corrected i did not read your post right 4.250 is the stroke you are using not bore. Wiseco Piston #K238A3 Bore 4.310 Compression...
Comp. Height 1.520 with 6.800 rod Stroke 3.76/2=1.88+Rod 6.800=8.68 Deck Height 10.200-8.68= 1.520 Comp. Height
I have one of these guys up the street from me maybe a mile whole back yard full of cars and a model A under some covers. Going to restore it he...
The more rubber hose you use the softer or spongier the brakes will feel.
Me and my sister being sick every Christmas from excitement. Playing with my hot wheels under the tree Hot rodding H.O cars And AFX cars...
This is a great post thank you. My wife thinks i ,am nuts reading stuff like this.
Hurst Wheels I cleaned for a customer.
283 Rebuild kit is $292.95 Cast pistons rings bearings oil pump all the stuff.
I would keep an eye on craigs list to.
Then it would have the lobe ID,s etched in the cam something like R-274/280 I have a Crane Cam Master lobe list catalog if it has the etchings...
Separate names with a comma.
The Jalopy Journal
