The Jalopy Journal
As stated above, I had the same issues with a project in the past. I bought an inverted flare plug and works from the Mc to the wheels, insuring...
[ATTACH] Car Has been sold!!!! Body off frame, blasted and painted. Body is original. No rust. Running driving project. Instrument cluster...
Thanks ! Trying to get the small stuff dialed in. This helps a lot. Sent from my iPhone using The H.A.M.B. mobile app
Looking for some suggestions on a set of mirrors for my car. I have the curved 4 in peep mirrors and they are almost useless. Been looking...
I have a reworked oem radiator out of my car. Was using it prior to the engine swap. Has been rodded out and pressure tested, then I used it for...
I have a new old stock aftermarket fuel pump. Says AC Delco on original box. Also a rebuild distributor. Distributor is single point. Water...
Bump Make offer, my flathead stuff is gone Sent from my LM-V405 using The H.A.M.B. mobile app
Looks good. I run the duraspark distributor and a GM 4 pin module under the dash. I have no road miles on it,but it's a hot spark. Starts...
I used factory explorer cast manifolds, which are not pretty, but they fit tight and are light, believe it or not. I wrapped them, and that keeps...
I finally got the flathead out, and a fresh 302 in the car. I know I'm breaking some hamb rules with the serpentine belt, but to me it's not that...
I know this is old, but been working on this problem for a while and recently cleared a hurdle. Fits, but I use factory explorer exhaust on...
Sold all Sent from my LM-V405 using The H.A.M.B. mobile app
Sold Sent from my LM-V405 using The H.A.M.B. mobile app
Not an expert, but have done some of this type work before. I would definitely get a 3600 rpm motor first, then use the vfd to slow it down or...
Looking for advice for wheels for my 41 Ford deluxe. It's dropped with a axle and reverse eye springs. I have disc brakes on it so I gained...
I have one set from a engine I sold for a block, all from that engine marked 8ba, for $50. I have a milk crate of rods from various years that I...
Original to the car, I had it rodded out and cleaned at a local radiator shop. Ran it with my car for 781 miles, then I pulled the flathead. New...
City: Warrenton State: Missouri Price: $sold good working 12 volt alternator and bracket for v8 flathead ford. I had it on my 41 ford. Worked...
I have two large cleanout oil pans. Both are filthy dirty. Good usable shape. You have to pay shipping. I have several stock style items to...
I need some Covid 19 project money $275??? Sent from my LM-V405 using The H.A.M.B. mobile app
Ok, how bout $150 Sent from my LM-V405 using The H.A.M.B. mobile app
Any takers at $300? Sent from my LM-V405 using The H.A.M.B. mobile app
The wheels are not true rubber. If you go to surplus center .com you can find lots of wheels that fit various casters. ( I paid about $4 a...
Wanted a heavy press, but didn't like the ones I could actually afford. When I finally got enough scrap together last winter I got it build....
Ttt Sent from my LM-V405 using The H.A.M.B. mobile app
Btt Sent from my LM-V405 using The H.A.M.B. mobile app
Bump drop to 180 Sent from my LM-V405 using The H.A.M.B. mobile app
Bump, price drop. Any takers for $350? Sent from my LM-V405 using The H.A.M.B. mobile app
Separate names with a comma.