The Jalopy Journal
This one is made of scrap steel and cost around $10. I made templates out of Masonite and used an angle grinder, drill press and a mig welder....
Up
Btt
X five on condenser……..
Here is a 1934 five window coupe drivers side b-pillar for parts. The top and bottom hinges are pillar side only and the middle hinge is...
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]
For your consideration are cast GMC letters I suspect came off of a 50’s or 60’s truck. They are excellent shape. The mounting barbs are all...
[ATTACH]
Your pics are a treat. Kinda like waiting for an Estrus 45 to show up in the mail in the 90's. Keep it up.
[ATTACH] Not much new here. Finally found a passenger front fender to do a mock up. Hmmm.....full fendered?
SOLD!!!
[ATTACH] [ATTACH] Ss34coupe is not kidding. Working with a race car body is a slog. It's a ton of work and just as much patience ....but how...
[ATTACH] Here is the POS from post 326 coming together. It's taken years to track down all of the body parts. Floor is now repaired, 2 cowls...
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] For sale is a '30 - '31 ford model a coupe back 1/2. Included is what you see in...
Thanks oj. There is no compression spring that I can find. I’m wondering myself how the die returns besides the little set dowel that holds the...
Thanks for the lead Oj. Do you have any contact information for Kent??
[ATTACH] Wow Thanks Toreadorxlt! I fortunately do have the bell and the threaded holder minus the spring steel retainer. So if you look...
Up for the day crowd....
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]
[ATTACH] I recently acquired a neat old Rams head planishing hammer that was rusty and frozen up. With some patience and persistence I was able...
I put all of the dimensions of the Ford driveshaft in Solidworks which in turn gave me the angle/floor and overall width that the tool needed. I...
[ATTACH] [ATTACH] Ok. Here is the finished lower shaft. This part took some time as I do not have any reference to go by. I am happy with the...
Ok. That will work. Thanks for taking the time to measure.
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] Fellas, I've been slogging through making a homemade version of the model A halibrand QC (101) for my...
Separate names with a comma.