The Jalopy Journal
Are you running airbags or lowered suspension? if so then i doubt a single piece drive shaft will work. I had mine custom made up in my 49...
On my 49 Hudson i used a hydroboost setup under the floor. heaps of room for it. Even air out still has room. Some details about it are on my 49...
hmm well thats not enough to get a 70 Buick GSX so I would get a Diamond T 201 Pickup. and the change I would use on either my 49 Hudson or put...
For me depends on what car im working on, what beverage im knocking back and if my missus is out wrenching or pulling lines as she pinstripes....
Would love more room. [IMG] [IMG]
My little ol town was covered in the sweet smell of Bogan(red neck?) perfume recently (tire smoke). The Waimate 50 NZs longest running street race...
[IMG] After a 20year apprenticeship she got the job. My bird got her ring finally and I scored some major points. Cracker weekend at Banks...
The better half and my self have been honing our skills of late. Thats right boss. Hours of hard yards have been put in out in the garage. You...
1948-53 Step Down Hudson custom. building it now. 1965 Buick Riviera chopped n dropped. 1939-49 Diamond T 201 pickup with duallies . Updated...
great idea upgrading the old anchors. One of the first things we did on our step down as well. [IMG] Not sure we are aloud any welding on this...
[IMG] I need a bigger garage.
All those Valiants, Fords and even mid 80s 4AGE Toyotas that I swapped away for crates of beers and a days work.
Seems im overdue for another update. Best remedy that I guess and spew forth more pics. To keep all the electricals ticking im using a...
One of the Nailheads first design features was it had to fit where a inline fitted. so was narrow. to me a 401 is a small big block. my missus...
hey ya take the clock out. Open the back up and give it a light bit of WD40. Have a a bit of a tinker about by carefully wiggling bits around....
Welcome back viewers to yet another ever so thrilling update on the old Huddyson. Sitting here and looking back over the last few years I must...
I use Wix normally and put a strong magnet attached to the outside base of the canister as well. Got told the trick years ago by an old rodder who...
Started on the floor at the back. The cover over the diff will be able to be removed should we ever need access to the diff, air bags or what ever...
update?
Oh man I haven't updated this for so long. Six months ~ time fly's and all that guff. Didnt really do anything to the Hudson over the Summer....
Man some great ideas for a Morrie guys. Hadnt even thought about a three window. pretty cool - nice work bro. Ohh thats cool and pretty spot on....
Hey guys Hopeing themoose or someone maybe able to help out with some photoshop magics. 1956 Morris Minor split window series II coupe that the...
dude thats starting to look cool. And for me personally I like the lines you are getting better than a stock coup. the larger rear window you...
Look like the stock ones that came with my 65 401. I scrapped mine for tight tucks that dump center as pictured below. I would say my old stock...
got to say the Ridetech 4-link set up I got is a nice kit. Good thick parts. good instructions. mounts for bags/coil overs. adjustability. Might...
Buick made them to replace the I8's so they are narrow meaning they fit well in many older cars. Adapters are out there for transmissions but can...
https://forum.hetclub.org/discussions http://www.21stcenturyhudson.com/hudson_parts.html http://www.wrphet.com/index.html...
I use "solidworks". Its made for engineers and designers to design up parts and assemblies. one neat feature is the sheetmetal side. design up a...
do it right the first time man. If you feel EFI is the best then wait a bit and save up. Going to be winter your way soon anyway. no point...
this is taken from http://www.hydratechbraking.com the place I got my setup from: " Q: What is the nitrogen reserve / accumulator cylinder and...
Separate names with a comma.
The Jalopy Journal
