The Jalopy Journal
There's a guy in Phoenix that could probably help if you can't find someone closer. I would need to dig up his contact info.
Dan has been out of the Winfield adapters, plans to make more in the future but no schedule yet. I offset the seats like that in my Speedster,...
Here's a shot of the part Neil Jern made to adapt the Ford water pump to Olds/Chevy. For this project I will be using a low mount water pump so...
That’s a Burns intake with Winfield bolt pattern. Here’s a picture of the stock Olds rockers for reference… [ATTACH]
Gathering parts for a winter project... Olds 3 Port Head, Nash rockers, and Winfields. [ATTACH]
We used to spray the tanks in early Porsche 911s with Wurth SKS, which is similar to bed liner. It is done more for abrasion resistance than...
If the engine is newly rebuilt the rings may not have broken in yet, creating the excessive blow by. Just add a copper scouring pad inside the cap...
Beth Piranio is having yard sale today and tomorrow for anyone in the Denton / DFW area. Should be some interesting parts from the shop...
Van Pelt still sells the worm gear. I heat it up with an induction heater and pop it off with a gear puller using a big washer on top of the gear...
Contact Steve Serr for the gasket and a set of his ARP head studs for the Cragar head.
That's probably the old Continental Diesel thrust washer that was commonly used before the AER stuff came along. I'm away from the shop right now...
Once you have a brake, you're going to want a shear so might as well keep an eye out for both. I ended up buying a Mittler Brother's box and pan...
I use the Preval system when I'm too lazy to clean the jamb gun.
Yes, Monte Vista Colorado dirt drags will be back at Movie Manor next year. I'm pretty sure the dates are listed in the events section. This will...
To add to the above video, most old timers would drill a small hole at each end of louver and cut the slit between them. This will keep the metal...
What pump are you using? Inlet needs to be under 7psi for that regulator to work.
Finally getting back to my bitsa speedster project. 32 motor and gearbox with quickchange rear mocked up. Now I can finally measure and shorten...
That screw buster looks interesting! I have used the oxy with 00 welding tip to get the screw red hot and then quench it WD40. Follow up with the...
Okie Joe 580-268-3704
Not to worry, in past years I have not received any confirmation but my name was on their list when I arrived in Monte Vista.
Hoping to get another weekend out of the old banger before the B motor goes in. Also bring 2 vintage karts and 11 y/o kids so they can hang with...
Good luck on your venture. As you start to do foundry work, you will see how that experience will effect future designs. This will be very useful!...
If you know someone with a cheapo 3D printer you can download the models to print your own for free... https://makerware.thingiverse.com/thing:2305656
[ATTACH] Looking forward to another great year. The Banger is taking some time off so I'll have my AV8 and my son will be doing the kid drags in...
Panhard bar has nothing to do with your steering geometry. Make sure when you setup your vega box the motor and column are set so all linkage is...
I've never used Federal but shear blades aren't exactly rocket science. If everything else is tight on the machine I wouldn't hesitate to spend...
Thank you. Yes, I built the car last year. Currently working on a B motor for her.
I have the Mittler Brothers 3 ton manual bench press with a shop built die. The limitation of this setup is depth of work, but it's been fine for...
PM me if zzebby can't help. Don't send any money until somewhere here sees it in person.
Steve Hogue does a class 1x per year I think. http://stevehogueenterprises.com
Separate names with a comma.
The Jalopy Journal
