The Jalopy Journal
I see…by “card” you mean the round part with 2 contacts on them. I can replace with new like so. Once I find right size and remove card and put in...
I think I found my own solution…mount one of these in each....
Picked up 3 Guide B-31 lights this weekend at GOODGUYS Raleigh and want to use them for front turn signals on my 34 pickem up. How do I remove...
interested in this idea. I suppose this would mean modifying my pedal assembly so that linkage ball is sticking up on drivers side? How would I...
Looks like I have an extra hole in the firewall underneath the pedal assembly. Am I missing a part of the pedal assembly? Am I missing some sort...
First, the specs: 34 pickup with original spoon pedal assembly mounted on firewall with dual 97s (direct linkage on drivers side) atop slingshot...
I’ve tried searching too many times but not finding it. Someone thought it was from a Tucker, no luck with it either.
thanks CaptainComet, I actually have 2 wire wheel caps that have these knockoffs mounted on them. I’ll post a picture of them later when I get a...
thanks KB…I thought pics 9,10 was exactly that.
I have a few sheet metal parts, a hood ornament and 2 spoke knock offs that I need help identifying. Sheet metal parts could be 40 ford/Mercury...
I’ll take a look at adding some washers once I have my drag link made. Thanks for the ideas.
Bump. Any ideas? Anybody.
Ok gents more questions on my steering. I have my steering box rebuilt and bolted into the frame so I can get measurements to build my drag link....
Call Stewart Warner’s tech support. They should be able to help.
For hardware be sure to check out ThirdGenauto.com. Great folks and fast shipping too.
Sun 4k tach, model RC-3. $50 SW 8k tach, model 82163. $50 SW electric oil pressure, 0-80 psi. $25 SW mechanical oil pressure, 5-100 psi SOLD SW...
I haven’t called lately but when I did I had to call a few time in a row to get someone online.
Bttt
‘34 Ford pickup (commercial) grille shell. This shell presents well but does appear to have some repairs made in the past. Will need more work to...
I am curious about the flathead radiator hose pipe kits I see advertised as well as homemade rad pipes in general. Are these just for aesthetics...
Shocks are back in. 2 1/2” of shock shaft exposed at ride height so I should have 2 1/2” each way (compression/extension) I measure them at 20...
Those stem style shocks have been returned….so no cutting and welding going on with them. ….and I got the bottom shock mounting plates bent and...
I will look at this but there might be a clearance problem between axle tube and crossmember if I bend plate correctly to get shock pins parallel...
it is camera angle. During the mock up stage, I think I measured angle in the 10-15 degree range. I’ll try cycling the suspension once I get...
Yes but i would have to someone with a torch so I could heat the 1/4” steel plate enough to bend it.
I got the new upper and lower shock mounts in place as well as shock in. I know I asked about shock mount pins/ bolts being lined up but here is a...
I’ll play along but my first HAMB year vehicle just came about 2 yrs ago. Better late than never. 34 ford pickup Given to me from my father who...
Ok gents, made a template from 1/4” plywood to mock up my lower shock mount plate with the shock adapter bolted to it (it will be welded to plate...
those are nice. I may consider them as plan C, haha, if what I planning to fab doesn’t pan out. I am curious on a measurement on those. Can you...
I’ve got P&J shortys for the front (1084 ones without the top cover) and I was using one of them yesterday to play around with mock up on the...
Separate names with a comma.
The Jalopy Journal
