The Jalopy Journal
Hey guys. Funny thing.. this company made the centre hinges for dodge wc trucks through the 40s and lots of other trims etc The strange thing is...
Ok i have found K&n E 3442 oval 8" filter will work and fit. I cant find a lid for this filter though so may have to make one, unless again...
Hey guys Im looking to fit a Enderle bug catcher onto a single 600 Holley carb. Im thinking the 5 1/2" air filter is kinda small. Has anyone...
Thanks for that info. Yes the retaining pin length makes sense
Hey chaps. My 1942 Dodge WC mod project is moving slowly, I need to know something. I have a chevy K10 1974 12T open rear diff assembly 6 lug...
Again thanks for the options. Sounds like a reasonable idea to change to a modern gearbox. I'm going to run a separate transfer case so that...
Awesome info guys, that alloy bellhousing from a van looks interesting
Possibly but need a link or address to view specs. Thanks
I think it is a 435
Hey chaps. I'm in New Zealand, working on a 1942 Dodge WC body and tray. I have a 77 club cab D200 chassis I am going to make 4x4. My LA 318 has...
[ATTACH] Hey guys, I know its been thrashed around before, but I can't locate any recent threads on this topic. I have seen heaps of this fits,...
Hey guys for what its worth. On my other posts I have had the LR axle walk back in June due to retaining ring failure. My rear after...
All good I worked it out I needed the Dorman 610 186 wheel studs [not 610-025 .564 knurl] they are .472" od knurl with 7/16 20 threads. So if...
Hey guys. I have got my bop 28 spline axles but the wheel studs I bought are a fraction over 1/2 " knurl. The studs are 7/16 20 but my axles have...
Hey chaps. My axle is worn on the bearing surface and where the lock ring was seated. I have done my best to identify the diff but am still...
Yep well my 10 bolt Chevy did the axle walk today.... right on a blind bend on the road to Raglan NZ. Loss of drive going up hill I had 3 secs to...
Hey Pete, I know your extremely busy with work. Since its been raining so much you must have done some more on the build. Must be time for an...
Hey guys update, I know its been a while. I have done a fair bit of work on the Chevy since December last year. I wont go into it much other than...
Thanks Engine man. I was trying to find detailed info on how this filter works, your explaination is great. Is there any other technical info for...
I have got the wix filter with the bypass now. If I run a 1/4 " line back to my tank, will I need a fuel regulator or will the pump move enough...
Cheers chaps for the comments. I dont think the gas cap is an issue as the car would be more troublesome on the open road if it was starving for...
Working on this issue again today. Ambient temperature is 59f. After idling for an hour and 30 mins finally stalled out. Fuel pump temperature...
Hey guys just joined up to the wealth of knowledge available on this site. I have an interesting problem and it has dogged me since I got my car...
Separate names with a comma.
The Jalopy Journal