The Jalopy Journal
Was just wondering if there was any later or earlier model units that would bolt up and interchange with mine? I'm having a hard time finding a...
Picked up a 250 6-cylinder out of a 67 Camaro for my '54 F100. Was checking it out a little closer and found this. Is it a resistor of some...
http://cgi.ebay.com/ebaymotors/Muncie-floor-shifter-3-4-Speed-Ford-Chevrolet-Oldsmobile-66-67-68-69-70-71-72-/190574998265?pt=Vintage_Car_Truck_Par...
So, I'm temporarily running a unboosted power steering box from a 1987 S-10 on my 54 F-100. 195/75/R14 tires on the front, small block chevy, S10...
I've had this motor and tranny around my shop for years. The local shriners bought it to put in their truck, and ended up just giving it to us...
I tried searching, but couldn't find anything on tailpipes that run right underneath the bed cap and out the back. I've seen it before, but I'm...
I'm getting ready to wire my '54 F-100 from scratch. One wire Altenator, Push Button Starter, and Headlights, Brake Lights, Tail Lights. I know...
I've got the Starter off of a '88 4.3 V6. will this work on a Two-Piece rear main seal flywheel for a SBC? The flywheel is off an automatic, and...
1816887 "Made In Canada" heads. Are on the 283 2-bbl in my '66 Chevy truck. Are these any good?
No Rat Rods please. I'd like to see projects, or finished cars, built from what others considered trash or unusable or just saved from the crusher.
I'm currently running some 14" S-10 steelies on the back with leaking 195 60's on them. Where can I find some 16" steel wheels with this bolt...
Got a 96 Cop Car given to me. Complete. I think the track may be too wide though. Anyone got any specs or pictures of this chassis being good for...
Is there anyway to convert the electric choke quadrajets to a manual set-up? Seems like I read or heard somewhere that its not possible for some...
Is there anything wrong with running a transmission with no dust sheild over the converter and flywheel?
Does anyone have any pictures or tech of sports car inspired customs from "Back in the Day"? I know alot of WWII vets returned home after seeing...
I want to avoid doing the whole clip swap. I have heard of swapping a-arms for disc brakes, but just recently read that you can swap the disc...
I can't find anything pertaining to wheel surgery with the search function. I'm looking into modifying my steel wheels for more a little more...
I heard somewhere that back in the '50s, before Cut-Outs were pretty affordable, hot rodders would saw the necks off old gas tanks and splice them...
Any reason why I can't put these wheels on my chassis? They have the same bolt pattern.
Where can I find a set with the offset holes/pin in place? Preferably with the square type U-Bolts? I would make my own, but I don't have the...
Me and one of my friends were discussing how awful this would look. I know its been done, but have never actually seen it myself. For...
Anyone else noticed any fat fendered roadsters built in the 50's with "dog legs" cut down into the doors for entry? The doors were usually...
1975-1980 4 bolt main Chevy truck 350. Edelbrock Performer intake, stock quadrajet, 2 1/2 inch duals with glass packs. No A/C, but power steering....
I'm building a trailer, and I have a ford beam axle with welded spindles converted to paralell leaves under an old utility trailer. My dad bought...
I'm using this '54 or so F-100 frame under my '37 Chevy modified. [IMG] I understand that ladder frames are not the strongest thing in the...
[IMG] I first ran across this truck two years ago, It was pretty much given to me by the "Original Owner"'s grandson-so we got a rollback and...
I have the same car in the classified ads, but-If I can't get what I need out of it, I'll probably make it a keeper. Only problem is, thing...
[IMG] Got this along with my '46 Chevy truck for the back glass, turned out to be about 8 inches too wide on either side. It was covered with...
Any suggestions? However, due to Kentucky's laws, I won't get an completley "unrestricted" license for atleast another year.
[IMG] Seem like a good idea? I kinda took a liking to this thing yesterday.
Separate names with a comma.