The Jalopy Journal
I channeled so it goes down over the frame so there are no holes left to go off from.
I'm hoping that some one might be able to take some diagonal measurements of their 29 tudor sedan for me. I need measurements between the back of...
Anybody make their own model A front window frame? If so do you have any pictures or details on how you did it? I also have thought about trying...
What's everyone using for carpet in their hot rods that no longer have OEM floor pans? Where did you get it? I have a model A coupe, so it's...
1" bore
I have built a 29 Ford model A coupe and I have 58 Buick drums with 48 Ford backing plates and hardware on the front. The rear brakes are a stock...
Brian, I remember making a comment to my wife at the Relix Riot show "Hey there's Flynbrian's car from the hamb" when we were there. Sorry to hear...
Also they are both new speedway parts axle, perches and wishbones. Sent from my iPhone using The H.A.M.B. mobile app
It’s a pretty small gap, maybe half the thickness of a dime. Sent from my iPhone using The H.A.M.B. mobile app
[IMG][IMG] There seems to be a slight gap between the wishbone yolk and the axle even though the perch is tightened up all the way. Is there...
I'm trying to put my gas tank and cowl panels back together on my 29 coupe and it's not going so well. I am using a different tank but still a...
Is this a good place to do the chop on the front A pillar on a ‘29 coupe? I’m getting ready to give it a hair cut and frankly I’m scared as hell....
Is it alright to chop the top on my 29 model A coupe while its off the frame and just sitting on my body dolly? I have the body braced up to keep...
Woodie, same thing on my '29 panel. I got mine from Howells and it took so long to get it, I didn't dare send it back for another one. I ended up...
Maybe from the lower corners of the back window level over to the opposite side A pillar. Or wherever you choose. I don't have any interior in...
Anyone happen to know what the corner to corner dimensions would be on the inside of a 1929 coupe when everything lined up and i is square to the...
To those that have used the following Speedway motors model A brake pedal on their '29 model A coupe with a stock frame and a 350/350 drive...
I need a new set of cowl panels for my 29 coupe, who has or makes the best quality ones? I would assume it would be Brookville roadsters, but they...
Actually no. But I have a set and they’re not open today so I thought I’d ask here while I’m thinking about it. Sent from my iPhone using The...
Anyone know how to install the aluminum type drip rails available for model a’s, like the ones Macs sell? Roy Sent from my iPhone using The...
[IMG][IMG][IMG][IMG][IMG] The first model A off the line, and it was given to Thomas Edison as a gift. It started off as a roadster body but...
[ATTACH][ATTACH] My orange ‘65 before and then after the disaster. [emoji30][emoji35][emoji24] Sent from my iPhone using The H.A.M.B. mobile app
It’s for my coupe roof ... talk about irrational! At no time did I say I wanted it for free. I simply asked a question regarding the going rate...
How much are your salvage yards charging for roof sections. My local yard wants $200 for the roof off a ‘59 Edsel wagon. It’s has some good lines...
Really digging what you're building!!!
How much epoxy, 2k primer, polyester primer as well as top coat paint and clear would I need for an over all paint job do you think I will need...
What I have is a 29 coupe on an original type Brookville Roadster frame with a 2" Kick up. I have the 2 3/4" Speedway drop steering arms on that...
[ATTACH] [ATTACH] [ATTACH] This '65 C10 was my pride and joy! I spent 10 years collecting parts, involving 3 parts trucks and 1 1/2 years of work...
I see that your tie rod is on the top side of your wishbones and beneath your frame. Is that going to hit the bottom of your frame rail when the...
I know this thread is old, but it's a game I can play since I do have one. LOL[ATTACH][ATTACH] [ATTACH] [ATTACH]
Separate names with a comma.