The Jalopy Journal
I tackled this same problem a couple of weeks ago. The bearing on my '61 was stuck so I ended up making a small puller, similar to the steering...
i am looking to make a semi custom hub cap out of a 63 mercury wheel cover. i need to cut a 2" dia. hole in the center to make it happen. attached...
thank you sir. thats just what i needed to know
ok guys, I'm a/c illiterate. It's august in texas and I want to get my a/c going. The car is a 63 mercury monterey with factory air. Are these...
63 mercury on a surf road trip.
thanks for the responces guys. took the sending unit out and there are several cracks in the float, hopefully thats my only problem. anybody know...
can anyone walk me through how a fuel sender is wired on a 63 mercury? I'm getting pretty tired of having to guess how much gas i have. I bought a...
galveston island is pretty bad. my mom got back on a few hours ago because she is part of the UTMB e-1 crew. She said there were 15-20 boats...
do i need to run a resistor with the ptx conversion kit? the car is a 63 mercury with the 390 if it makes a difference. thanks. -joe
i read somewhere that you had to register your car to do the cruise. any truth to this? i cant really find anything but event coverage on the net
has anyone been to this show? is anyone going this year(08/08/2008)? I've got some good friends from the area and they say I should check it out.
thanks guys. its a 63 mercury, ive ground them off before but was wondering if an air chisel would be faster. should have just said that in the...
what is the best way to remove the original the ball joints while the control arms are still on the car and you cant get a drill to them?
nobody?
Well my first question is about my fuel pump in general. I've got a '63 mercury w/ a 390. There is a glass filter between the pump and carb that...
would this cause a hard down shift when coming to a stop?
i dont think so. it's running much better after the tune up. i just have to got get a vac. gauge to set the idle mixture. will let yall know if...
thanks guys. i'll try the rag trick now.
fuel filter is new. idle mix screws wont cause this under acceleration will they?
i think so. acording to the manual is supposed to be .016 i got it as close as i could. it stumbles a little right off of idle then i only get...
just an update. cleaned out the carb again with no luck so i moved on to the electrical side of it. had a spare coil and condenser so i threw...
the only thing is that it ran a 300 plus mile trip this week (after the first time i took it off) with no probs, has a new filter that is still...
thanks guys, its a stock 390 with a rebuilt 2bbl carb(from o'reilly's). guy said he put it on right before he sold it but that was a year ago. one...
i've got one of those clear filters and its full of fuel, and has a new filter in it. i'll go mess with the throttle now. thanks for the input
heres the deal. a week or so back i ran out of gas and afterwards my car started running funny (wouldn't idle but would be fine with a little gas...
http://www.jalopyjournal.com/forum/showthread.php?t=77566 all the info you'll need
im kinda in the same boat...head to round up, cant beat the show and im sure you can even meet a couple people too
count me in
i cant decide on smoothies or supremes, or just some cool caps. im leaning towards smoothies but wanted to see if anyone could work thier magic...
bttt...anybody?
Separate names with a comma.
The Jalopy Journal
