The Jalopy Journal
Is that what they call Machinery Grey?
I've been in contact with a Baileigh "Sales Specialist" over the last few days asking for a quote, and if Shane Henderson was still there, and...
Were you able to reach anyone at Baileigh about the discount?
Neil Hall, did you ever get ahold of anyone?
Motorcycle turn signals off Amazon. They are sequential with little arrows. $14
I think I answered my own question. I believe they are 82-92 Camaro.
[ATTACH]
Picked up these seats today, have no idea what they are out of. Anybody have an idea? Thanks! [ATTACH]
Thanks Squirrel, that led me to it! It's 68-73 Ford Mustang, Torino, Falcon, etc.
Thanks John, I was thinking Mustang II but I have not found a picture of any Mustang II, or Pinto anywhere that looks like these. The pads are...
Anyone know what these calipers are off of? Their good, I just need to get new pads.
Crosses over to an Autolite 26, but it's a heat range 6. Might be too hot.
I have a 70's 305 with early 80's 601 casting heads. All new internals, Lunati .458/.284 cam and lifters, 9-1 compression. I've narrowed it down...
What length did you use? 48" ?
Yeah, everything is working perfectly, except this.
Actually, when the key is off it reads temp, but I get the joke.
The only possibility I can come up with is this...I have a SBF with an HEI distributor. The thermocouple for the gauge is right underneath the...
Okay so, i'm having a really weird issue that I've never come across before. I have a mechanical water temp gauge with a typical thermocouple. It...
Just FYI...After further examination, I figured out the reason it doesn't have the recess. The recess is actually on the timing cover, not the...
Thanks guys. If the new gasket I ordered has the tab, I'll just shave it off and add a thin skim of silicon to the bottom, then do the typical 4...
I ordered a Fel-Pro 1 piece gasket today from Summit, but it looks like it also has the tabs. At least on one end.
Hey guys, I was installing a new oil pan gasket on a 302 out of an 86 Thunderbird. The issue I'm having is the end seals. The rear has a recess in...
I sourced a new speedo cable for a 67-68 Mustang, got the correct tooth driven gear for my application. Fit perfect. I appreciate the help guys....
It's a clamp style. Thanks for the help guys!
All of that is good Steve, the engine and tranny came out of a running and driving car. The sensor I have is damaged, so I'm looking at either...
I talked to my transmission shop when I got it, and he said it was a very late model C4, prolly out of a pickup, but many people don't even know...
I'm putting a late model 5.0 Mustang engine and tranny in my 31 Coupe. I believe the tranny is a 94'-98' C4/C5. It has a VSS (speed Sensor) like...
He actually did the magnet test right in front of me. I am a firefighter and he runs all of his tests at our local airport. We always have a pre...
After talking with the owner of this beast, he told me the entire cab was aluminum. Has anyone ever heard of a 40's aluminum cab truck? He said he...
Did you box the entire frame, or just what you have in the photo? I am running a full fendered 31 coupe, and I'm planning on putting a small block...
Separate names with a comma.
The Jalopy Journal
