The Jalopy Journal
The other thing I did was to remove the caliper, place a piece of plywood (same thickness as the disc) between the pads. With the hose still...
This is the way I got all of the air out....... [MEDIA]
In picture 2 and three you can see that the frame bracket on the right side of the car is bent. Looks like the sway bar was used to pull the car...
Thanks "yellow dog". I picked up quite a bit of info from Speedway's on-line catalog. And your quote of 500# per 5* is the kind of info I was...
Two months into this project and I have found that nothing is cheap unless it is my sweat. I want the front end as far forward as I can so that...
I ran across this post today and this guy installed a sway bar on the rear of his '32. I think this is the way I want to go only on the...
Paul Horton's. Just the cross member. Everything else is stock Mustang 2
That is exactly what I want to know. I do not want to spend the rest of the summer building and testing sway bars. I am looking for a base line to...
I am installing a Mustang II front end and I have not been able to find any reference to what is used for a sway bar. The stock bar is too big of...
What a beautiful car!!! Love the skirts and leaded doors and hood. When I turned 16 in 1956 everyone lusted after a '51 like yours. Probably still...
I have a Lincoln Ideal Arc 250. Last of the copper core welders. Purchased it new in 1980 for $600 along with a Conley Kleppen water cooled...
Thanks for the reply. I took a quick look at the pictures and tonight I will read that thread from start to finish. You do good work...........Terry
I want to build a pick up box for the back of my hotrod (for lack of a better name) and I am sure I ran across several threads where the guys...
I use 3/4 inch plywood cut into the same circumference as the tires and drilled to match the bolt pattern I am going to use on my rear end. That...
I keep getting these requests to tell a little about myself. Makes me feel like I am going to confession!! OK, so lets start at this end. I am...
Separate names with a comma.