The Jalopy Journal
Can the one that you do not trade for be bought?
the crank shaft angle should be 3 degrees down, if you are running ladder bars or leaf springs set the pinion at 3 degrees down this will level...
I transfered a NY registration for my 31 roadster with no problems, got tags that day and in a few weeks had my title...altho, the title says 1931...
Here's my 37 truck, still under construction, the top is now chopped and the frame is almost finished.
pay for the altenator and the frieght and I'll send ya a 1 wire GM alt. just my 0.02 worth
Well, I have a 31 Roadster and building a 37 truck, guess I would want a later model truck...hmm, maybe a 40 Willis truck...if that's not...
I'm building a 50 chevy truck on the extended cab short bed s-10 frame, move a few mounts and walla, there it is. Tuner
contact Jason at ghx inc in Houston texas...713-939-7526, he can help ya
Interesting way to trim your pipes. [IMG]
WOW WOW WOW!! very nice...we are building one for a customer, lot's andlot's of metal work done and to do, but soon it will be in paint..some pics...
The original coils in the sbc were ran with points and condensor. They were designed to have a resistor wire in the harness. The ignition switch...
When in doubt, rip it out and start over My 0.02 Tuner
You really want to keep your lock up, not only for the economy, but in over drive there is not enough line pressure without lockup and a...
Here's a couple of pics of my experiencewith dual blowers.. Tuner
I have a 31 with the rear suspension using the Model A spring, I installed a panhard bar because I could feel the rear getting a little itchy,...
I've been using the truck m/c with stock boosters and the smaller 7 and 8 inch boosters, works good
try License Plate Jesse...210-532-7456
To be redundant, I also have had to pull many H2O pumps from the parts shelf and use the taller one. my 2cents
I prefer the Holly.
Wow!!!!
some early big block vettes had the 3 bbl carb, 2 primary barrels with a large oval secondary. Tuner
Yep, glad you came to see our great town of Marble Falls, deep in the hill country of Texas, come again any time and give us a note, hospitality...
Keep up the good work, kid. Motor doesn't matter, do it the way you want to. Keep us posted on the progress.
Texas requires two tags, but, if you can find a dealer tag for your year, you can register the tag to the car and run only the rear tag since...
Nope, not gonna wear one, can't make me, I say the same thing about motorcyles, like it was said before..."Goggles and a big grin is that is...
I use Dupont 99 single stage black with flatner to the liking of your taste for flatness
Here's mine, love the chrome reverse... not quite smotthie, so am I dork to?
looks great!!! Scott enjoy !!
Just thought ya'll would like to know.... 24TH ANNUAL NATIONALLY ADVERTISED BELTON SWAP MEET MARCH 31ST AND APRIL 1ST AT LITTLE VALLEY AUTO...
any pics of the mounts and the tape measure to show your measurement?
Separate names with a comma.