The Jalopy Journal
blown and injected bb going to be drivin on the street.amazing
my favorite
ol dawg i agree with you on thin metal, a tig is the way to go if not, spot welding with a mig is to.The class he took at wyo tech was chassis fab...
Hot bob you wanna hear something.A friend of mine went to wyo tech to there fab school.They made him pulse weld or spot weld you will call it.he...
shock mount as well
a front end i just built
Kiwi kev is my hero all i have to say
Here is the pics of the motor i just finished.everything is fresh on motor took time to make it perfect. And a shotty picture of my 8 hour port...
Yes indeed the stock mounts will work i am using a stronger bushing setup though delrin.I pocket ported and polished the exaust ports only.taking...
I got a dual plane intake now.I am going to be running a 2.34 * 4.88 lift camshaft ,dual two 1/2 exhaust and magnaflow mufflers.My rev limiter...
Yes the steam holes are drilled i drove it all summer in las vegas never went about 210.mechnical fan no clutch direct drive.i rejetted in from...
I have a 57 chevy.I am in the process of rebuilding the motor for it.Tell me what you think about this odd combo the car had in it. I would like...
My 57 4 door 327 4 speed family car.
I love mine put my car seats in it and drive with my whole family.Still got enough power to run 13.9 for 4 door
So i just baught a chevy 350 from a guy with casting number 10243880.i know there is posts about what these motors are.my question is i know its a...
really what hp numbers are we talking to do this ,i am running a muncie behind my 350.i am taking it to the track next weekend i might wanna...
sorry had to bring this back,this is one of the best threads i have seen, here is bad news at viva 07.
my 57 did that,heat wrapped my starter never happened again.set my timing at 8 degrees as well you can buy a mini starter for sbc from speedway...
thats one bad ass 56 kiwi
...
thanks guys i built bars almost to the tee of the traction masters last night,launched it it wrapped up serious even with the bars ,the car is...
what are you guys with leaf springs running to keep your axle in place under torque.do the slap bars that mount to under your leafs work.i will be...
thanks squirrel your the sh!t
i am setting up the rear end in my 57 chevy,i installed a auburn limited slip,i have the shim under my pinion bearing that came off from under my...
would love to have a two door but for my family i would not trade it for anything ,nothing like having two ten mon old twins in the back and a...
thanks for the tips, i have spoken dirrectly to aubrun gear and they put a promise on the limited slip will hold for 4 years, if it fails they...
last week i blew my rear end apart on my 57 chevy while launching it.part of it was because it was old but has been regeared,part was because it...
i was interested if someone has had this happen and what they put to hold,i have drivin a car with spool on street it didnt turn quite so well. i...
i have a 57 chevy 10 bolt rear end 8.5 inch 3.73 ratio ring gear,car has four speed muncie,tonight i launched it and bang then coasted to side...
Separate names with a comma.