The Jalopy Journal
Yes, it is 15/16 sorry for my mistake. The master is below the floor and below the caliper. I will take a look at the master as you suggested to...
I did check for direction of flow on both residual valves, still same problem. I will give Wilwood a call to see if they have any idea or can...
yes, I did bench bleed.
Still working on my 30 Model A project and have a brake bleeding issue. It's a bit complicated to communicate but let me try. Brake Equipment:...
Need some help with my Headlight Housing. Thanks to some of you we determined that my headlight housing were Spun Brass. The housings have some...
Thanks for feedback, looks like oil level measurement may now raise its ugly head. I will give your idea a try and thanks again.
Thanks for the feedback and offer on the Bronco Pan. A friend has a 5.0 Mustang rear sump pan that I'm going to try. It has about the same...
Thanks for all your help I will check both your suggestions.
Thanks everyone for the feedback. Looks like my desire for a low stance coupe has some issues to be resolved, however I will overcome. I'm sure...
Yes, I think that is my best possible fix at this point. I measured a rear sump pan and it is about 6.5 in the front and 7.5 in the rear. This...
Yes, that is a possibility however my current pan is a cheap chrome pan so have to purchase a new one. Thanks for feedback.
Thanks for feedback will check it out
Started the mock up of my 30 Model A prior to paint and found the bottom of oil pan is to low. I have a SBF 289 with OEM front sump oil pan. I...
Outstanding idea, I really appreciate the feedback. The wheel I'm looking at simply says "fits GM style Column". Think I will order wheel and...
Sorry for confusion, I have a Speedway Hot Rod Column, this column has a quick disconnect designed for a 3 bolt wheel. The column is splined,...
Gold mountain, nice looking wheel.
Thanks for your reply I will check it out. I have a three bolt column however the wheel I want to use is for a GM column therefore I need to...
Can someone tell me what steering wheel attachment GM column utilized on 1969 and newer column. I need to fabricate a Steering Wheel Adapter...
Thanks for the info, apparently your correct, I reposted the wheel question and it also disappeared. Sorry for mistake did not know about 65 or...
Thanks I just reposted
I can't imagine that I ask something that failed to meet some rule. I received a couple replys and posted a thanks for the replys and ask if the...
I recently posted a new thread asking for feedback on a set of wire wheels. I received a couple possible answers and responded now I can't find my...
To all those who tried to help with my door handle fit issue. I'm embarrassed that I ordered the wrong handles. I ordered the open can handles...
I think I'm at that point, hate to screw up a new set of handles but what the hell, no good unless they fit. If I rotate the handle while...
Thanks for the reply, I did as you suggested and it did go in further however it's still approximately 1" away from the door surface. I can use a...
What is the trick to install outside door handles on Model A Coupe. I know this is simple but guess what this simple ass can not install. I have...
Separate names with a comma.
The Jalopy Journal
