The Jalopy Journal
So I sent the carb to Mr. Cicala. What a nice job! The carb looks new, he supplied all of the missing choke parts, and his turn around time was...
I have removed the original carb and sent it to Mr. Cicala. He is going to rebuild it and replace the missing choke parts. Thanks for the info!...
I want to thank you all for the replies. If it was my car I would go to a later manifold and later carb and modify or adapt the air cleaner as...
I want to replace the teapot 4bbl on a '55 Ford 292, but I want to retain the original air cleaner and intake manifold. I have searched and read...
I received the rebuilt unit from Rusty at Speedometer Service. Very nice job. Installed the unit and new cable supplied by him into the car, and...
I just checked that. The cable was sticking out past the bell at the end of the sheath about a half inch, maybe a little less. I pushed the...
Working on a '55 Crown Victoria. The owner passed away a year or so ago, and the car was sitting. The son wants the car gone over to make it safe...
12 1/4" to the top outside That'll do! Thanks a bunch! Greg
Yes, well, it isn't my car. It's a very nice restoration of a 2 tone green '55 convertible. The owner wants it correct. Nobody has a '55...
Working on a '55Chev, which someone has slipped a '56 V8 trunk lid onto at some point in the past. Would have been nice to have caught that...
Well, I thought about that, but I don't know if that would be an apples to apples comparison. I don't have it apart, and it was hard to find the...
I am going to replace the original booster and master cylinder on my '56 Sedan DeVille with a dual 8" booster/dual circuit master cylinder. I...
I am working on a 1950 Biz Coupe, and I want to know if there is an 'easy' upgrade for the REAR brakes on this car. I'd like to find more modern...
Yes, the driveshaft caps were retained by plastic. It looks like I need a 3R 1350 conversion joint, looking like a neapco #11-00530R or...
U joint problem 10 bolt to '86 Caprice driveshaft I have a shortened '86 Caprice driveshaft and a 10 bolt and I can't find the correct conversion...
Separate names with a comma.