The Jalopy Journal
i got a 3 bolt helmet built by Bubbas that has a 11a advance mech. installed.. only has probably 20 miles on it.. still fresh!!
got a set of Coker bias 800.x15 white walls on caddy rims.. good shape, never used that long...
It was a great show, I always go... and thanks for taking a photo of my coupe!! [emoji106] Sent from my iPhone using The H.A.M.B. mobile app
Well the spring on the adapter was sitting funny on the points cup, so it was grounding out in the case... it’s actually kinda long! Adjusted it...
[IMG] Sent from my iPhone using The H.A.M.B. mobile app
It has a new Bubba dizzy.... but It ran great cold.. warmed up starts to miss.. the hotter it got the worse.. that’s why I got the adapter. I...
I have 1.5 on the primary side and 6500 on the secondary side... Sent from my iPhone using The H.A.M.B. mobile app
I got a 39 flatty that I just installed a coil adapter from Mac’s.. I was running a stock helmet coil, but took a dump so I installed this......
I have a bunch of sheet metal that was taken off a 63 Cadillac Fleetwood back in the 60's and stored in a barn.. Complete 4 doors Driverside rear...
Plastic tag in door jam are just oil change reminders Sent from my iPhone using The H.A.M.B. mobile app
That's a ricky bobby rod shop car a think.. Sent from my iPhone using The H.A.M.B. mobile app
Thanks Bruce!! Yeah I added 2 1/2 quarts in the main case and left the inspection plug out till it drained out and stopped.. just takes a few...
Yeah I have the plug on the top, and a drain... I just don't wanna remove and disassemble just to drill a hole in the axle tube for fluid level,...
I got it used, so I didn't get any tags or anything... it does have a large fill plug on the QC rear section, but it's (kinda) sealed off from the...
I was wondering if anyone knows how many quarts it takes to fill the V8 winters quick change rear (closed system with stock bells) 1-3/4 below...
Does anyone know where to get a uncut original style floor mat for a coupe?? I see that they sell a Mat for a Sedan that looks like the same size...
Oh ok.. I have no idea what coil is in there.. probably just a stocker. I wonder how much stock coils could can handle Sent from my iPhone...
39wagon do you run a resistor before the coil? Or are you just running 12v to it?? Sent from my iPhone using The H.A.M.B. mobile app
Well it's definitely a 12v system in the car..but the dist. and coil look stock.. I'm guessing it's a 6v ign system... Sent from my iPhone using...
I just bought a 30 coupe with a 39 flatty and a "helmet" dist.. builder said it had a petronics unit in it.. well long story short, while driving...
Separate names with a comma.