The Jalopy Journal
Thanks, I have been looking for the "so called" carter pin...
Help... I am about to remove the (331 CID) OIL PUMP PICK UP SCREEN. Can this be done while leaving the OIL PUMP in the engine ?? I am...
:) We are opening up one security cam for an Internet stream... This one IP CAM shares a cam-server with 4 other units, so it will be a bit...
What is the proper way to install a stock windshield. Fairly fresh glass, new rubber, all the cab body work is done. What material do I need...
:) :) :) Thanks
Thanks, Yeah I believe the diaphram is gone. I say this because lately I have had to prime the carb to start the engine. That tells me that the...
Dropped the pan on our 52 - F2 last night. The clean out needed attention and the pan was bent, so we decided to make the repair and try to...
The wheel standin' bad ass chevies are here: http://www.f100project.com/photos.html Click on the videos...
Several galleries of the Hot Rod Reunion at National Trail Raceway Enjoy... http://www.churchfieldracing.com/F100/photos.html (video will be...
Looking for any HAM's that might be on the HAMB. Would like to start a NET on 75 or 40 meters for a HAMB members or hot rodders in general....
Prep the track!
I up loaded more than 50 images and the server lost control!!! They are all working now. I put them into 3 Galleries. 2 for show down and 1 for...
Still uploading files... check back later. EMMR and VIDEO are done.
We were there so we went digital... Here are some of the results. http://www.f100project.com/photos.html Select Jalopy Showdown video and...
Downloaded the ZIPs. We were up in Detroit picking up some engine parts from a couple of HAMB'rs, and simply decided to pass Autorama knowing that...
I am considering home-brewing a 3 - 2BBL manifold for a 351Cleveland. I have several ideas in mind, including modification to a THROTTLE BODY...
The key to a good fit and notch is the "PipeMaster" (tm). We use it and make the notch with a 4 1/2 inch cutoff and a flapper to clean it up. I...
Eeeek - Bay stands to make a lot of money if this is real. Even if it BOGUS, some asshole will make a bid. I have been known to be an asshole,...
[IMG] Our Late Model. We run at Lernerville in Sarver PA.
New updates...posted today http://www.f100project.com
10 - 15 hours every week in our little shop...just keep pluggin' away. http://www.f100project.com
Thanks for the safety tips. I will make sure we use the respirator. BTW: Pizza in your PC oven...LMFAO
Is that a street stock back in the corner?
http://www.mortec.com
Metabo: I am on my second year with it. This unit gets hard use almost everyday. Burnt up my DeWalt in 1 year. We have a Hitachi that is almost as...
I have the Craftsman gun. I will sell it for 80 bucks with powder and extra cups. It works great. This would be good for you as a starter setup....
One word: US Abrasive
If you need a spare tire fender, I have an F1 fender for the 6 foot bed with the spare tire indent, all steel and in perfect condition. Don't...
I forwarded your message to a good friend of mine who is a chassis builder. Mainly circle track cars, but the technology is the same.
Yeah you could do that, and it isn't legal, but in many a case you would have a VIN off the frame, a VIN off the cab and who knows what else. I...
Separate names with a comma.
The Jalopy Journal
