The Jalopy Journal
Add mine to the list. Very much alive and well, here in southeast Ohio. The first time I saw it, I thought the grille was home-made. But then I...
Thanks Jon!
I have a 1959 GMC with a 270 straight 6 and a 1 bbl Rochester carb. It appears to be leaking fuel from a small hole in the upper rear part of the...
Such a beautiful build. You’ve done your brother proud.
Built by Steadfast, in Ohio I believe.
Is this Columbus Goodguys? I remember that one. Badass. Sent from my iPad using The H.A.M.B. mobile app
Saw this in LA yesterday [ATTACH] Sent from my iPad using The H.A.M.B. mobile app
Whenever you find yourself on the side of the majority, it’s time to pause and reflect.
Get your facts first, then you can distort them as much as you please.
[ATTACH]
Update to the update: It is running! I believe since all the fuel lines got replaced, I had to get all the air out of the system, and get fuel...
As per instructions.. Not sure why, but the instructions say that the pump may toggle on and off without it. Sent from my iPhone using The...
Carter PN P4600HP[ATTACH] Sent from my iPhone using The H.A.M.B. mobile app
Update: I have it wired in and plumbed. The pump primes for three seconds, just as it should, then I crank it and motor fires, but I am only...
Thanks man. When I bought it, I was going to use it for parts. But after some research, I discovered how rare it was, and could not tear it apart....
I have a ‘59 GMC with a 270/3-speed (column shift) and I’d like to convert it to floor shift. Anyone have any recommendations? Most shifters...
Well, I ordered one. I’ll let you guys know how it works. It’ll be powering a Carter pump and feeding an Edelbrock carb thru a Jegs fuel pressure...
Yes, as I understand it, the controller runs the pump for 3 seconds to prime the line, then looks for a tach signal (square-wave) in order to keep...
I am installing an electric fuel pump on my ‘57 Chevy truck (350, Edelbrock carb, aftermarket tank behind rear axle) I want to wire it safely and...
Squirrel, You have a great start, with a solid cab, bed, etc. but take it from someone who has been there; if you really want to "lower the shit"...
Separate names with a comma.