The Jalopy Journal
Well, I got it, and it bolted up, the scattershield is 1/8 of an inch shorter than the factory bellhousing. No conflict with the bigblock standard...
What I personally think the problem is, is the flat faced throwout bearing riding on the peak of the clutch disk, with no freeplay built into the...
That was the reason I was asking if anyone knew if the plate was required, the one I bought does not have the plate, but the 94 GMC bellhousing...
Yeah, I know, all of that is why I went to the steel scattershield bellhousing, and I have the 5.125 retainer.
from my notes, The sm420 is indexed to 4.686 inches, sm465 is indexed to 5.125 inches, and the sm465 bell housing is the same as an sm420...
Coincidently, this ebay item posted at the same time mine was removed for sale, but hopefully it answers the question, since it has BB and SB...
I will post the rest of the picks, I have to photograph them with my phone due to all the internet propriety stupidity.
I tried the 55 to 73 cast iron chevy bell housing, it fits the bearing retainer, but the other holes dont line up to mount the tranny, even...
I have a 94 GMC 1 ton dually 4x4 with a Carbed 84 pace arrow 454 nv4500, and 411 gears, but i cant keep a t/o bearing\hydraulic system in it for...
Been a while since i have been here, been busy as we all usually are. if this needs to go somewhere specific, please redirect. I am hoping that...
I want to use the iron weight to trigger an injector, cant have the injector firing 180 out, hence the stainless advance weight.
I'm looking for some stainless steel distributor advance weights, anyone know of a source for them, or how to change the weight on distributor...
This should not typically be a problem unless a lot of other things have been done, like decking the block, heads and intake. On a SBC the cam...
Maybe the aluminum ramps were the same as the ones used on uhaul furnature moving trucks. I have the same (flatbed) setup on my one ton that I use...
Hey Rob, neat project, would you be kind enough to post pics of the dual distributor, I'm always looking for new veiwpoints on those, thanks, dave
Gm also used an aluminum "Four Speed" transmision that actually had an overdrive in it. It looked like a "FAT" Muncie. (no solindoud, nothin else...
I will need the second distributor to be able to adjust the fuel injection seperate from setting the ignition timing. I do not want to give up...
This is crazy, but I just found out that a friend of mine made one using weed eater parts, the angle head down where it cuts the grass, from what...
Well. I have over 100 cars, some that were worth paying for were given to me, some that wern't, I paid for to get parts of of them that I needed,...
My Mom had a 64 wagon with a 351 in it, bout 75. Crazy assed woman would walk on a carlot looking for a grocery getter and unknowingly by the...
the block was clearly not decked, as the numbers are still on the water pump pad.
it "WAS" the 250 for sure, the 300 hp auto was an SB I "think" (250 hp standard, R code, 300hp RB) you could not get a 300 hp with both...
Hilborn is a drool system if it is the same system as the bendex/ roschester, when one injector fires, all the injectors fire. the TPI systems...
yes, it is an LT1, and I am working on a simular LSX. The thing that makes it imperfect to me is that it was designed so that I could not fix it...
are you talking about the distributor for a GMC 702 ci V12, considered that, it wont work because there is not enough adjustment, thanks though
No its not a state secret, unless you consider that the va is to cheap to compensate their disabled veterans so they are to poor to be able to...
Yes, the S and the L362 (Dec, third week of production, 1962, when block was cast) means that the block was out of a 1963 impala with a pg trany...
Hey, what were the letters on the water pump pad? just interested.
do you have any pic of it before you took it apart, somebody might recongnize it better that way, especially since a sponsor or particular sticker...
I PM'd him, hopefully he will help me. Im good on thinking this thing up, but scratching my head at how to get it done.
Separate names with a comma.