The Jalopy Journal
well thanks folks.. good to know about the truck trans. I will use it after I check shifter positions
Hey out there. I am going to use a 350/ 5spd from a 92 Chevy 1/2 ton,. but I do have an s-10 one and a Camaro one also. 5 speed trans I mean...I...
thanks guys..i also thought 41 is different...I found out that the front cross member and rad support are not the same, as the diagram...
thanks, that was my understanding also...just want more than me thinking that
have a 40 ford frame. after I pulled the rotten body off, I found many bad patches and rust holes...so I but another 40 frame and it is 2" too...
325w and blue one, I did...United, through Speedway does NOT sell patch panel, only whole panels..unless you can find United patch panels...
I checked Speedway and they do not have patch panels, just whole panels, and some of the inner supports,...I can live with my rockers if I have...
hello from Langley, BC., Canada.......I have just purchased a 32 Ford coupe, project.. I need lower cowl, rocker and quarter repair panel...now...
thanks, guys..
hey all, I just bought a TCI rear spring kit, with no rear spring..can not give them $600. US, for their spring so will someone measure their main...
thanks for the help..I did say I was just thinking..I do like it as is also..
ok, let's see where this goes..lol I do know how to, and have chopped lots of cars, but now I am thinking of chopping a 59 Pontiac [Impala] 2...
that merc back window is killer...looks super, nice job
sounds good, thanks for the info, Istwsh
like as I said, as I am typing this it all of a sudden made no sense at all..getting too old for this.??? I do not like GM steering up to 54...not...
I am just doing this and have ordered a tie rod to go from side to side..then you use the tie-rod end, that has a tapered hole..Speedway sells for...
front clip looks like 80's G-body GM..Cutlas, Regal, Monte, ect
does any one remember using 49-54 Chevy spindles and brakes on a 36-48 Ford axle.??? seems to me we collected those Chevy brakes, but I am old...
just went through almost all the classifieds, and 1/2 are sold ??? can you not take them off.? it would take a lt less time if they were.. thanks,...
I have used the hamb-o-dex...I have contacted 5 different ones, but still no luck..2 have not got back to me yet..? anybody ?? need 58 Chevy...
anybody coming North from California with empty trailer ?? it is light, a 58 Chevy sw, no motor , trans, or front end...easy roller, guy will...
looking at 58 Chevy wagon that is for sale on c/l. if the guy gets back to me, I was wondering if anyone has time to give it a quick look...
yes we have lost another one of the greats..I am glad I met him a few times and have pictures of myself and George..RIP
thanks very much...I thought I might be loosing more of my mine..
hello. somewhere I saw, recently, a 54 Ford tail light being frenched with a very kool piece..it appears to be similar to stock, but it had a real...
all sound advice..and now I know. thanks all for your help..I do like the looks of the poly and I had many when I was a youngster...they were...
I have tried on the search, but to no avail. I have a 1966 Poly engine and have hear it can be done and it can not be done..any Mopar kings out...
here is a real nice back seat that I bought from a fellow hamber. I paid $200. and $100. for shipping just like to get my money back.. seat is in...
hello from the west coast of Canada..you two have done such a great job...hope I can get to Sweden one day, and visit you guys and see the real...
wow, I needed a fix too. just went through all 27 pages in one sitting. in the am, I will be off to work on my 54 Merc custom....thanks for all...
Separate names with a comma.