The Jalopy Journal
Looking good man!
My '62 Fairlane 500 [IMG] [IMG]
My buddy John, ls1wagon on here, and myself did the PT in 2005 in my '78 single turbo Fairmont. We had a crappy map, a borrowed GPS, no gas gauge,...
Got a new regulator on the car. 14.2v 22a at idle. Fixed. Thanks guys!
No, the belt isnt slipping or squealing. With the car running, if I ground out the field on the gen the voltage output drops. to about 1.5v. If...
I appreciate all the help. I 'think' I tested the generator the right way. But the results might show a bad generator. Voltage goes from 6-7V...
This is a Fairlane. 221 V8. Its the factory generator, regulator & wiring. The brushes are new and contact at the commutator seem to be ok....
Thanks for the link. Im gonna test my battery and then test the alt. as the like suggested. Last night I searched every post about...
FL1A = 5 9/32" FL300 = 4 11/32" FL842 = 3 31/32" I had to run a smaller filter on my 302 in my Fairmont to clear my downpipe. I am using the...
Last week my generator light would come on and stay on after starting the car. A quick rev and it would go out and stay out. The next start it...
They are probabbly 28x10.5x15, its plenty of tire.
62 Fairlane [img]
Here is my '78. 302 w. a 88mm big frame. Im running a CSU 750 carb, Aeromotive 13202 regulator, Magnafuel Prostar 500 pump & filter, -12 to...
More often than not you dont need to bother with messing with the holes on a set of stock or aftermarket headers. You can make plenty of power...
Yeah, it had 13's with 7.00 - 13 BFG Silvertowns. Whew... at least my wheels arent billet. They are cast! Btw, what does a spider cap look like?
As far as I know, I dont think there is a kit directly for these cars. Everything was made. I did buy the laddar bar crossmember from quartermax,...
Thanks! The shock mounts are at the rear of the two link bars. The top of the shocks mount to a crossmember in the trunk. Ill see if I have...
Bryan here from Dallas/Ft.Worth, Texas. This place got linked on dfwstangs.net a long time ago and I started lurking from there. Love the tech,...
Im almost done with my '62. [img] [img] [img] [img] [img] [img]
Separate names with a comma.