The Jalopy Journal
I live 35 miles south of Wentzville, I have worked there some. Expanding area!Did have a Drag strip (MAR) but closed now . GM plant is there too....
[IMG]
Heres a 37 Americiana Ford.
We got yours off ebay used, it was a good deal! Went on easy, the caliper can be mounted forward or to the rear. We have a problem with the...
From one redneck to another! I used PRO-15 seemed to do the job, extremly tough stuff, wear gloves for sure though.
It dont look good! [IMG]
You could go to a fuel oil company that delivers to homes, that hose they use is the right size, and has more flex. We used it on the 49 chevy we...
Does your engine have bolt holes (3) like this one? [IMG]
I'm having the same problem, what is your 350 out of? Are engine is out of a 87 chevy truck. Its been awhile sence we worked on it cant remember...
What kind of uprights, stock,what year, aftermarket?
ECI requires a spindle adapter! You need to know what kit you have! Some kits require turned spindles, some dont! You might want to ask Speedway...
Very cool indeed! This could help a lot of people! Way to go. Denny
I talked to ECI today they are aware there is a issue with the clearance of caliper pins when using the 53 and up , upright! They mentioned...
NO! I have 1/4" spacers! [IMG] thay are placed at the top of the spindle! I'll go check out eci again , but I havent seen any...
Yes ! that would work! But who wants to take all that shit apart every time you want to do a check of the bearings or whatever! Somethings not...
Ive been doing some checking around and have found no one asking about the clearance issue, this leads me to believe I have done something wrong....
We are having problems with the ECI brake conversion, thought we might get some help form someone whos done it. We changed the uprights to 53s...
How was the swap meet this year? Any good finds?
my guess is 110 pds, without the drums and backing plates!
Cape is that weekend also, about 50 times larger! I think its there 40th!
Is this a 110 or 220 volt machine? If 220 check both breakers at the box. Dont know if this is possable maybe its only working with 110 V! Just...
We installed stock 53 uprights to a 49 chevy stock front suspencion, you get 1" drop! Direct swap nothing else required!
ok! you have juice! Does the feed wheel turn when trigger depressed? We are using a lincon 125 sp, output 20Amp! When we first started using...
Not sure if I understand fully! Does the machine show that it is recieving jucie? If it is , could it be possable that the trigger in the...
Have any of you guys got pictures?
Finished up the face lift of the crabs today. The air bosses were cut off and a 3/8 steel pipe plug inserted in the hole then welded up with...
I have a caliper out of a concrete truck I use for a King Kong ash tray. A buddy of mine has a mag wheel cut in half and uses it for a garden hose...
What kind of valve covers are you using? Is your exhaust below or above the spark plugs? What kind of Dizzy you got? Good wire are costly but...
I would think you could check the pad again for even wear! I measured from the uprite to the wheel mounting stud and get 6" on the new setup,...
Would like to know more about this! I just got this setup the way you see it,look familuar? [IMG]
Separate names with a comma.