The Jalopy Journal
Who is Bo Huff?? I've known him since about '91 and live about 200 miles from him, but have been by his place a lot of times and have never been...
I've made some spreadsheets and put them on my site. Most are related to Land Speed Racing, but the transmission gear ratio ones might be of some...
I will probably be here in Nov., but have to go to Missouri some time in there to help my mom out. Send me a PM when you go. I was thinking of...
I was looking for the Jetter's :rolleyes: . Looks like I found one of them:) . Hey if you get over my way be sure and stop in, haven't seen...
[IMG] I know some of you have been following Hooley's efforts on the salt for the past three years. I just posted a page that shows some of...
Stating that you even tried it with the TV cable off leds me to believe you never have checked the geometry of the hook up point to the carb...
[IMG] Ok so the picture above was of two crew members, Jim (River1) and George (PurplePickUp) at an Anasazi ruin somewhere west of Blanding on...
Great run guys and it was nice to pit next to you. I'll be so happy if I can see a 200+ timing slip someday and I'm a lot more aero than you are....
Someone John knew gave they a good deal on a big sheet of 3/4 inch steel. Another friend loaned John (WZJUNK) a plasma cutter that they used to...
Hi eveyone, I got back yesterday and John and Hooley ought to be home about now. I'll try and get the whole story with some pictures on my site...
[IMG] I always thought the 38-39 were the ugliest trucks in the world. Then I found the one in the picture out in the desert here and dug it up...
There are going to be hundreds of people camped at the bend in the road. You could be one of them:) . Showers at the truck stop or use someone's...
A little too late, but next time make a simple tool that goes up into the holes of the filter that you can turn with a wrench. It doesn't have to...
I'll admit to using one. The current one I've used for the past couple years with no problems and it has two delay settings and various shade...
I like it a lot:) . If mine looked that good I would leave it alone and just drive it. Here are two pictures when we were digging it up. The...
[IMG] Thanks, I had the pictue above of the differences, but not which was which. Is one of those that you posted yours? c ya, Sum
[IMG] I don't mean to hijack your thread, but I noticed you have a '39 pickup. I dug the one up in the picture out in the desert near here...
If you haven't done "a lot" of body work don't get one even if you can find one and forget the air one also. You will create more work for...
[IMG] If you have a Jeep (or other vehicle) with a winch on the front you can make cheap and easy to make A-frame type lift like I made for the...
If you really intend to try and use two pieces and splice them with no support under the splice a bottom plate is way more important than the top...
You would just need two temp. posts or maybe just one. With one put it just outside the load and away from the wall you want to roll towards....
Say I have had a place on my web site for some time for rodders first cars: HERE If any of you want yours added send me a picture along with...
[IMG] First car was this '51 Vicky that I tried to customize in my driveway in 1960 when I was 16 (guess that tells you something about my age:)...
I mentioned that it is possible to narrow a clip. I didn't. I widened my fenders, which besides giving me the tire/wheel clearance I needed also...
Just a note on Camaro clips. You can narrow them and they do sell narrowed a-arms. Personally I would narrow one first. On my truck I widened...
I'll be looking for them. Even if they don't get the 200 with the roadster their current 185+ record is remarkable!!!! c ya on the salt, Sum
[IMG] Here is a picture with it tacked back together. [IMG] Here it is done. I took 2 inches out of the hood, 2 from the fender behind...
You gave them away, I was just the interpreter:p . Hey Charlie and Ken are leaving the Nats after they win the "give-away" car and heading here...
I didn't say there was anything wrong with the flux-core and it does the things you describe, but one of the great things about the MIG with gas...
I had an older 110 Miller and liked it a lot, but didn't totally trust it for frame work. I sold it and got a 175 amp 220V miller and love it...
Separate names with a comma.