The Jalopy Journal
SG Leslie and sons in Melbourne Victoria's north would be worth a try.
We had this problem with our 4 banger A Sport Coupe. The BB Lincoln front brakes on 32-4 spindles on a stock Model A axle widened the track 1...
I was only wondering the other day how this was going. Well done.
Cheater imports and Cheater exports may be able to help you. They are are family company. One is in the Indianapolis area and the other is in...
Both issues arrived here in Victoria Australia today. My son got his as well.
Cleveland's were used by Ford Australia until about 1984 in both 351ci and 302 ci. The 302 was a destroked 351 with closed chambers and 2V port...
We had a good time, thanks for the invite. First good drive in the A Sport Coupe with a Burtz based banger. First drive around town was the...
One of my sons and I are doing the same repairs to an Australian 65 Falcon hardtop. We have used back door skins and 1/4 panels from a 4 door to...
Yes they pricey. I had to add in the low Australian dollar plus freight.
Speed hut offer a conversion unit that uses a cable drive to the original...
I had a front end shimmy in my Sport Coupe some years ago. Couldn't get the kingpins to wobble, replaced front shock absorbers because one felt a...
1955 Ford air condition vents on the top of the dash for Customline / Fairlane. They are different to the 56.
The English Fordson 10/10 van. Looks a bit like a larger Anglia van with a small 37 Ford pickup grill. It has a front axle that looks like a...
Cheater imports (Melbourne) and Cheater exports (Indianapolis) is a family run business at either end. Kevin in Indianapolis is a Hot Rodder of...
Yep, I've put a 39 box in our banger powered Sport Coupe. But as Fogger said if you just turn it sideways it turns the wrong way. Because I needed...
It has a lot more than 1" of clearance. Those measurements are under the running board brackets. Lowest part on the car is under the middle of the...
Hi Kid, on my Sport Coupe it's 5 1/2" at the f Hi Bob, on my Sport Coupe in avatar it's 5 1/2" front and 6 1/2" rear. Tire size...
Yes Brianf31 it is a nice combo. Phill
My A Sport Coupe has a 393 Cleveland in it. Scat forged crank, H beam rods, 4 bolt conversion, girdle, custom Comp hyd roller, CHI 2V alloy heads,...
I used the front parts of 2 pair front fenders many years ago. Joined a left and a right together over the center of the wheel for each side. This...
Melvin,s Classic Ford Parts in Conyers GA might be worth a try for parts. I bought quite a lot of early Falcon parts from Melvin when I was in...
393 Cleveland (stroked 351C) in the 28 Sport Coupe. Diamond block B in the 30 Town Sedan. Coyote in the 55 Country Squire (unfinished).
I had a similar shake in my Sport Coupe a some years ago. It tool a long time to find it. I could not get any of the front end components to...
In picture 2 is the old shock mount tube right through to the other side of the crossmember? If so then you may find that the second leaf is...
That looks like a common repair that Pages Chassis Works performs before he drops axles. Just be prepared to wait a while although the waiting...
If you find yourself hanging out for some good Aussie food take a short trip down to Marietta. A mate " Mark Allen" has the " Australian Bakery...
No Wayne, the black one that Tim sold to your brother was the other one he owned at the same time which had been a Spades car and before that it...
To the best of my knowledge it was an early rod that Con Mantzaris bought of a car lot, it had a Flathead then and was red. He did some clean up...
During July 2012 when my wife and I were planning a 5 week driving trip through the USA. Ralph was one of several H.A.M.B members that invited us...
Well we have been home almost 2 weeks now and are still on a high from our holidays. After we left effingham we headed to Auburn to the Auburn...
Separate names with a comma.