The Jalopy Journal
1952 t0 1956 pedal set up Just like the ones in my 53 88
I have a show polished 471 that we just built,it has the old stype bearing plates and from cover. Also have the two carb. adpt. on it also...
I have done this same thing many times thye are a bolt on stup. no problem.
You dont need to all the way through the bell for the shift rod. If you do put a patch on the inside of it or some times you get oil leaking into...
If you can wait until tomarrow, ill go check in my shed. There is a bucket full of them, Gotha,thats what you have, i also have McGurk, Isky, M/t,...
JC Whitney has a direct bolt on floor shifter for the early Hydros right now in there book.
Ive got one on my 51 Vicky and it was made by Ansen Eng.
Ran 303 and 324 in my 32 ford full fendered coupe with a lasalle trans. and used the stock manifolds from 1949 to 1956. Just use two left driver...
Diamonds Body Shop in Evensdale,thats right next to waterloo. # is (319)235-0479. They do alot of hotrods and street cars around here. Good work...
Thats correct I have 20575r15 on the rear of my 51 and its is ok. Just have to let the air out to put on and take off,since i am running late wheels.
Hi we have seen many of those drives before. Delta and Tom Beatty stuff. Thanks R&P BLOWER SERV. (319)234-8679
You can not run the chilled iron lifters with this cam unless it is a hard face overlaid one, the lifters will eat it right up.
This goes way back for me, but i used to turn the drivers manifold around backwords and run the pipe out over the frame and out of the fender...
We do that sort of welding and repair every day, on blower cases,rotors, bearing plates etc. Just give us a call for quote R&P BLOWER SERV....
1964 Olds Cutlass has a beautiful XO Blood color. We have used it on many wheels. R&P BLOWER SERV.
Why dont you go over to SSI in cleveland and talk to Rich or T.J. They are the pros in delta setups. R&P BLOWER SERV.
Weiands cases all have the 1 inch added to the front of the case to maintain the clearance of the dist, or mag. ect, just like a 6. Bolt spacing...
All depends on the amount of over or underdrive you have, pulley and belt type also. R&P BLOWER SERV. 319-234-8679
R&P BLOWER SERV. in Ia. does a great job on rebuilding for the st. and comp. Machine case, pin rotors,custom rear bearing plate, glass bead or...
All 303 and 324s had soft cranks. You would run the silver babbit bearings in them. We have been runnig yours with normal bearings and have had no...
KAAY and WLS reached all the way to Waterloo Ia. in the 60s, for sure. Dick Beyonde was the DJ for WLS after midenite, and used the sing "ON TOP...
Might be able to help you out. Im only 15 minutes from Waverly. We have a truck to haul it also. Thanks Rudy. Just give us a call R&P BLOWER...
Drive over the bridge to podra island and jump in the gulf. Great beer nites there, in the surf.
Call Autoville Inc. on Nellis Blvd. in Vegas. # 702-651-9529. My sister owns the place and they are super honest, also hotrodders. Her guys will...
I have a spare 53 olds. rad. if you want it. [email protected]
you need to flip the shackles up
303/324 and 371 pans will interchange. Thats 1949 to 1958.
Your timing cover will fit all engs. from 49 to 58. 303 thru 371
Cutahay field just outside Corpus if i remember right
Early Beatty drive. Kinda rare noa days. Nice parts
Separate names with a comma.