The Jalopy Journal
Jeg's sell this motor and recommends a 2400 stall. Don't know why.
Thought about that, too. Gotta check it.
Jeg's sells this motor and recommends a 2400 stall. Don't know why.
Just learned Jeg's sells this motor and recommends a 2400 stall with stock engine. Don't know why.
Don't know. The PO installed the tranny.
I do but obviously she doesn't.
Yep.
Thanks for all the good advise,Fellas. Will look into all suggestions.
57 chevy, Ramjet 350 crate,700R4,pwr front discs, 7-800 RPM idle. Must hold moderate brake pressure to prevent the car from rear -ending the guy...
Thanks, SF. Will give a try .
Thanks for the quick reply. Good advice,will give it a shot. Thanks, Dave.
I have a 307 engine installed in one of my cars. It ran fine for a while with a new HEI after market distributor. Now I have no spark. First I...
Good idea, but I don't recall any street rods with R-Jet EFI. Lots of tri-fives, though.
Yeah Boy, a picture is worth......
Thanks Ramjet1, most of the guys "got" the Ramjet 350 clue. Yeah, I remember the C2 Vettes FI units were called Ramjet. Rochester,as I recall.
Thanks, Bud....new longer cable on order.
Thanks, Bud. Looks like the previous owner has the cable hooked up wrong. It should ride in the pulley groove and attach at the at the bottom with...
It looks like Denver Dave's cable runs through the groove in the bellcrank pulley. Mine is clipped to the outside of the bellcrank on one of the...
Here are some pictures I just took. Hope this helps. S Dave
Denver Dave The pic you posted is exactly what I have in my '57.Lokar bracket,cables and all. Eng.was installed new in 2010. Excuse my...
This spring isn't the bed spring type found on most older carburetors. It appears to be two layers of tightly wound copper colored metal coiled...
My '57 210 HT has a 2010, stock 350 ramjet with 1900 miles. The annoying and dangerous problem is the extremely stiff throttle spring. From a dead...
I have a '59 Silver Hawk,SBC,Ford 9", Turbo 350. Solid body & floors. Will be for sale after I paint it.
I've got my Rochester 2bbl apart for rebuild. The accelerator pump discharge retainer ( T shaped ) is frozen inside the carb. Soaked it overnight...
Separate names with a comma.