The Jalopy Journal
Leaving gibbon around 9:30 with another buddy and looking forward to seeing everyone. Posted using the Full Custom H.A.M.B. App!
Planning on being there! Posted using the Full Custom H.A.M.B. App!
Thinking about going this year and was wondering what kind of turnout they have for the event? There are a few other events going on that weekend...
Here is a 40 Chevy I have been working on Posted using the Full Custom H.A.M.B. App!
well I got a good laugh today I pulled the engine out and started tearing it down got the heads off and all the pistons look fine!! my buddy that...
well I found the problem, I borrowed a bore scope and was able to see part of the top piston ring on the #4 cylinder! looks like I will be tearing...
I haven't solved my knock problem yet but here is where I am at, I have tried taking some timing out and went to a higher octane fuel and I...
wanting to put some different wheels on the truck and am considering a 10 inch wide five window on the rear and a four inch five spoke on the...
thanks for sharing, lots of really cool stuff there
The bearings looked good the engine had some blow by they tried to run synthetic oil from the beginning we did a leak down test and pulled it...
The motor was built a couple years ago but only had about 1000 miles on it so we put new rings and bearings in it
Thanks for the ideas. I will slide under it tomorrow and start from the converter and work my way back
thanks I will have to get under it and check it out, the u joints are new and I did just change the oil about 50 miles ago and used a wix filter....
Not sure if I am just hearing things or what,but since the motor was freshened this spring I have put about 400 miles on it and today while...
I first started with around 10 deg initial and 34 total and had to have the idle up real high to keep it running as I advanced it it got allot...
I am running 0 gauge wire with new battery, Im not sure if its because of the tunnel ram but it really seems to like allot of initial timing, cam...
I have a sbc guessing around 10.5 compression running 16 degree initial timing 36 total the motor turns over great for the first start but after...
Thanks, I have some ultra black will that work as well?
I just put it together it has about 20 miles on it and was wondering if there was a better way
I am running a eldebrock street tunnel ram and have a vacume leak where the top half mates to the bottom half, is this a common problem? I was...
I'll throw mine in, nothing to special just all done in my own garage
thanks ill check into them, I got one from speedway but it isn't short enough and doesnt look like it should be cut
for those of you with chopped tops, are you running a windshield wiper? if so where did you get it or what did you make it from?
thanks for the info, do the marine ones have a breaker built into them? I guess I should check with my local boat dealer
Who makes a good quality headlight switch? I bought one a year ago it had the relay mounted on it and was easy to install, the problem is that the...
sounds like a good time to me! pick a date.
I am just putting the motor back together had it honed and put new rings in everything else looked pretty good. Just figured the rings never had a...
sorry I forgot to add that but it is a sbc and yes both pieces came from the same place. I will call the tech line this week, I was just trying to...
Separate names with a comma.