The Jalopy Journal
Found this in a buddy's garage today. It appears to be a vintage parts washer . Has a screen in the bucket area and a hose going from the bucket...
[ATTACH] [ATTACH] This is the pattern I found after removing the flywheel. It appears to be the dual pattern. Do I use the 3 bolt starter from my...
Hoping to get the earlier engine out this week. Thanks for the info!
Passenger side letters and driver side tag on coil mount stud
[ATTACH] [ATTACH]
What other block numbers do you need me to provide you with?
Thanks for the info and the kind words!
I bought a 1964 Comet 404, 4 door car a few months ago. It has a 200 six with a 2 speed auto trans. Engine has 96000 miles on it and is tired! I...
Do you know of any shops in our area that would be capable of rebuilding a 230?
What carbs are you running on the 230 and are all the speed parts on an otherwise stock engine?
Just got my 48 Dodge D24 a couple of months ago. Giving it a full systems check and hope she will be roadworthy by late spring. Are cruises...
Good point my friend! By the way, we are almost neighbors, I'm in High Point. Maybe we'll cross paths soon
Thanks sir for your input on this matter. A "simple swap" is what I'm wanting. If you have anymore info to share about this swap, please forward...
Thanks for all the input you all. Going to check it out Saturday and try to negotiate an even better price on the combo. My 3 speed is giving me...
Found a 230 flat head with a 2 speed auto trans from a 55 Plymouth for sale nearby and the seller wants $300 for the pair. I'm considering going...
Thanks for the replies! I have planned to wait and see how the stock drive train holds up. Just wanted some input on my "possible", back up...
Purchased a 1948 Dodge 2 weeks ago and wanting to explore my options, should it turn out the flat 6 engine, trans or rear axle is in need of major...
The shop manual, (41-48 Dodge) that came with the car states that the wheels are 5" wide. Don't see anything about the bolt pattern though. Would...
The fist issue I see with my 48 Dodge is the condition of the bias ply tires on it. No idea how old they are, but they appear to be dry rotted. On...
Thanks for all the kind replies. Glad she meets your approval. Gonna start with checking all the systems for proper function and then some...
Hello everyone, just picked a "new to me" vehicle last week that I wanted to share and get your opinions on. 48 Dodge D24, 4 door. It's an...
Just scored an ifs from an 85 Jag for my 59 F100 panel. After looking at all the options out there, I liked this best. This is new to me and hope...
Going to do the brakes on my 59 F100 Panel soon. Plan to run drums all around, like stock, but would like to swap to a dual reservoir master...
Just wondering if anyone has put a tilt column in a 59 F100 and still used the stock a front suspension and steering box? If so, what column did...
Wanting to join the 57-60 ford f100 social group, but don't see them listed in the social forums. Where do I look?
Planning to put a 302 and c4 in my 59 F100 panel in the spring and wondered who has done this swap and which style motor mounts you used. I see...
That's great advise my friend. My plans, prior to purchasing the panel, was to use the 302 and c4 anyway , but was curious about the condition of...
No luck getting the 223 to fire. May end up going with the 302 and c4 I have.
All the panels shown look like the ones in my truck. Gonna check the c2c website first and go from there. Thanks for the input. Y'all Rock!
Besides the obvious outside appearance, are the 59 Ford pickup and panel identical? The reason I ask, is that I need a drivers side floor panel....
Separate names with a comma.