The Jalopy Journal
Thanks! :)
Is that grease liquidy or is it thick solid like normal grease ? How does it make its way in the sector shaft pin to lubricate the roller ?
What type of oil would one put in those steering boxes? I took mine apart today and it's in very good shape. Except all the gaskets were leaking...
Yeah, I have the nuts here but I'd have to mill some off the top of the lifters. I have holes in my lifter guides in my block to drive a pin in to...
I have too, but it only work to some extend... I currently have my engine apart with a brand new set of NOS Johnson lifters. They even came in...
Hi fellas, I know this must be on here somewhere but I can't seem to find it. I've seen in the past someone modded a set of adjustable lifters...
I had heating issues in town. Stopping at every red lights and idling along just didn't get the air flowing enough. Never had a heating issue...
[IMG][IMG] Look at the junk that was in there. I cleaned it best I could. It's actually working now. I used Vaseline and a bit of oil too.....
Anyone here knows the best way to free up one of those? It's off my 40 Tudor and it's not totally stuck, it does move with vacuum but barely. I...
my neighbour came over with a front brake calliper mount with one of the sliding pins stuck in it.. he wanted me to help him take it out. So we...
Thanks for the info Sent from my iPhone using The H.A.M.B. mobile app
What's the pros and cons of using the radiator over the engine for the thermal switch ? Sent from my iPhone using The H.A.M.B. mobile app
At least I didn't ask what type of oil i should use in my flathead. Sent from my iPhone using The H.A.M.B. mobile app
Hi gang, Running a flathead in my 40 Ford and I'm going with an electric fan. Wondering what thermal switch to use and where to install it....
Thanks guys thanks for the tips! Sent from my iPhone using The H.A.M.B. mobile app
Awesome, thanks guys! Looks like you can put the headers on with the engine in place? Sent from my iPhone using The H.A.M.B. mobile app
[IMG] Canadian representing Denver Deton8tors CC. I think I'm the only one on this side of the border. Sent from my iPhone using The H.A.M.B....
Yes, you can get a bolt on dizzy gear for the early flatheads to convert. Sent from my iPhone using The H.A.M.B. mobile app
I just ordered a set with the exhaust extension. I'm wondering if I have enough room to install them without puling the motor out? and I'm...
Anyone here running reds headers on a 1940 ford ? please share some pictures of your headers on both sides. Thanks !
I'm thinking about installing a 48-53 side mount dizzy on my 40. I have the timing cover and the distributor, just need to swap it. I can split...
I ended up sending it back and they reimbursed me full with shipping cost. Great service and good to deal with. \I was just not lucky and ended up...
I rebuilt a 59A with Merc guts for it[IMG]
[IMG][IMG][IMG] Pulled the engine out of the sedan Sent from my iPhone using The H.A.M.B. mobile app
has anybody tried the extensions with the headers? do they fit good? It says they are sold as a "pair" do they mean pair for one side, as they...
Hard core Ford guy but I have a soft spot for a Black 59 Cadillac coupe deville with red interior.
Can you use a 8BA intake manifold on a 59A ?
if you have a nut that's catching or bad threads that jams. Hit around the nut with a hammer (or whatever is closest) and it'll fix the threads...
buy the ones you can crank up like the gojacks . the ones you have to use a floor jack to put them on sucks.. I have both sets.
Sometimes its the journey, not the destination.. I used to be a long time owner, and then the sickness of wanting to own everyone of them got to...
Separate names with a comma.