The Jalopy Journal
Not dads car but a friend of his that helped him build his engine, and dad painted his car. This pic is from Edgewater Dragway in late 60s early 70s.
Ok will have to find out about advance part, Its a vertex, going in small block chevy.
Just picked one up need to know now to time them with engine. and is the post on the side to ground it out ? Thanks for any help
Work in a ship yard as a welder / fitter for 24 years.
Here my set up still have a little more to get it finished up. I using chevy truck axle and built the spring mounts and the hair pins.
If a lot of the greats of hot rodding would have listened to the nay sayers then were would all the great stuff come from. Get out of the box and...
Thanks guys for all your help
Remember sitting in garage with mom sanding the headers when he first got it home I was about seven then. Also mom was the only one that could...
Have seen 8 stack injecter on a blower in a mag i have some were, they machined the intake and adapted to the blower but in later pics in the same...
I,m chasing down the guy who help dad all the time to try to get name of who it was sold to and start that way to. Thanks guys
It sold in the mid 70s. Been chasing down some of dads buddies that are still living to see if they have any thing on it, and i will look into...
I'm looking for dads 40 chevy bussiness class coulpe. We lived in Warren county Ohio area in the town of Lebanon. All i know about the car's where...
This is my home away from home 40 feet from the house its not the best, but its mine.
Used that type of pedal in my dirt car back in to 80s. If you build one like it need to do something to lube the shaft thats runs thur the tube...
Used to throw my daughter in old one ton flat bed when she was one and we take off and hit as many yards we could that day looking for parts that...
As long as it does'nt bind rear end movement or try to pull or push axle sideways as it moves up and down should be good. That are some of the...
Study intakes how and why they work and don't work and if you have the skill and tools to do it go for it. The worst that could happen a bunch of...
I have seen it done before with a hemi using bbc headers it takes some work. As long as the tubes are close to the same spacing as the FE then a...
Ok wasn't thinking cause when you set a engine up some say to level it at the crab mount which would tilt the engine block up in the front. Thanks
Have heard that the thermostat has to be at the front of the engine or it will over the front of the engine. Why would it not do the same in rear...
Separate names with a comma.